When I got Cath a bike one Christmas I hid it in the shed - fortunately she didn't venture in there for the few days before Xmas She was a bit confused when she got a pair of SPD shoes - "These won't work with my (Look) pedals", cue rolling in the bike from the shed
The post man's been ...
Moderators: Bearbonesnorm, Taylor, Chew
- whitestone
- Posts: 7913
- Joined: Thu Dec 04, 2014 10:20 am
- Location: Skipton(ish)
- Contact:
Re: The post man's been ...
Better weight than wisdom, a traveller cannot carry
Re: The post man's been ...
As Bob says, don't wrap the whole thing, just a part e.g the saddle or the wheels and then produce the rest when you get that confused look
We go out into the hills to lose ourselves, not to get lost. You are only lost if you need to be somewhere else and if you really need to be somewhere else then you're probably in the wrong place to begin with.
- Dave Barter
- Posts: 3628
- Joined: Sun Jun 16, 2013 6:21 pm
Re: The post man's been ...
Or disassemble the whole thing into components and you have a jigsaw with the best end result ever.
Elite keyboard warrior, DNF'er, Swearer
Re: The post man's been ...
Dave Barter wrote: ↑Thu Dec 23, 2021 7:05 pm
Or disassemble the whole thing into components and you have a jigsaw with the best end result ever.
Yeah but don't forget to take a picture first to put on the box of bits like all the best jigsaws, and maybe an age range (cue "5-6 years but it only took me 3 days" jokes)
We go out into the hills to lose ourselves, not to get lost. You are only lost if you need to be somewhere else and if you really need to be somewhere else then you're probably in the wrong place to begin with.
- Cheeky Monkey
- Posts: 3915
- Joined: Mon Aug 01, 2011 1:48 pm
- Location: Leeds ish
- Contact:
Re: The post man's been ...
Hide it until the moment of handover and then just add a bow.
Personally I reckon wrapping it in anything is just a waste of paper. I'd wrap presents in newspaper if a) the wife would let me and b) if I still read them in physical form (and not on the web)
Re: The post man's been ...
Ended up wrapping each tube and the forks, took the pedals off and wrapped those, also took out the seatpost and saddle and wrapped those too, gave up on the wheels though
-
- Posts: 463
- Joined: Mon Nov 18, 2019 7:42 pm
- Location: Cumbria
Re: The post man's been ...
I ordered a Swift Zeitgeist last week, and this week I had a message from Shona at Keep Pedalling that they had a Wizardworks Shazam! in stock that was (ever so slightly) shop soiled. They both arrived today.
“I want to see the wild country again before I die, and the Mountains..."
Bilbo Baggins.
Bilbo Baggins.
Re: The post man's been ...
New LED bulb for my sewing machine so I can start a new project . Before I'd even got it fitted the control pedal went on the fritz. Bollox.
- ledburner
- Posts: 2035
- Joined: Mon Oct 12, 2020 8:47 am
- Location: The worsted place in West Yorkshire,
Re: The post man's been ...
Ehat you got, thete are eiring diagram on internet to fi generic
I hope you think you know, what I might of exactly meant.
Warning - may contain value odded typos & ither mythspellings..
Warning - may contain value odded typos & ither mythspellings..
- ledburner
- Posts: 2035
- Joined: Mon Oct 12, 2020 8:47 am
- Location: The worsted place in West Yorkshire,
Re: The post man's been ...
What you got? there are wiring diagram on internet to fit a generic one
I hope you think you know, what I might of exactly meant.
Warning - may contain value odded typos & ither mythspellings..
Warning - may contain value odded typos & ither mythspellings..
Re: The post man's been ...
It is a generic one that I bought a couple of years ago to replace the 1960's original when that failed. I'm going to try buying a diode to fix the original pedal first. For 4 quid its worth a try.
Re: The post man's been ...
And dropped off a pair of 100% Brisker Hydromatic gloves. I hate bulky winter gloves while mountain biking and am not keen on using my pogies while riding technical stuff (not sure why really). I usually wear normal Briskers and find them okay even in pretty low temperatures but they're hopeless if it's wet as well as cold so I thought I'd give these a try. First impressions are that they are a bit more bulky than normal Briskers and the fit is tighter (I sized up one size already from my normal Briskers). Time will tell if they're the solution to my problem or not.
- ledburner
- Posts: 2035
- Joined: Mon Oct 12, 2020 8:47 am
- Location: The worsted place in West Yorkshire,
Re: The post man's been ...
If it one of the 'carbon pile' ones also replace the caps suppressors. If they fail the motor still runs on its own... last year i refurbished a singer 201k. Sews well just straight stitch. I like older pre 1970's sewers (not the underground sustandard pipes ) they feed ok and handle heavier /tougher fabrics
I hope you think you know, what I might of exactly meant.
Warning - may contain value odded typos & ither mythspellings..
Warning - may contain value odded typos & ither mythspellings..
Re: The post man's been ...
Yep it's running on and for a 201k.ledburner wrote: ↑Sat Dec 25, 2021 12:17 amIf it one of the 'carbon pile' ones also replace the caps suppressors. If they fail the motor still runs on its own... last year i refurbished a singer 201k. Sews well just straight stitch. I like older pre 1970's sewers (not the underground sustandard pipes ) they feed ok and handle heavier /tougher fabrics
- ledburner
- Posts: 2035
- Joined: Mon Oct 12, 2020 8:47 am
- Location: The worsted place in West Yorkshire,
Re: The post man's been ...
I ve got a spare foot pedal do you need one ? £15 posted. Shout if you need it ..
Last edited by ledburner on Wed Dec 29, 2021 12:39 pm, edited 1 time in total.
I hope you think you know, what I might of exactly meant.
Warning - may contain value odded typos & ither mythspellings..
Warning - may contain value odded typos & ither mythspellings..
Re: The post man's been ...
A DHB Aeron winter cap made with Polartec Alpha Direct from CRC
https://www.chainreactioncycles.com/dhb ... prod187231
Got mine in medium and fits snug on my 54cm bonce. Looks to be well made but probably a bit warm to wear it out just yet...
https://www.chainreactioncycles.com/dhb ... prod187231
Got mine in medium and fits snug on my 54cm bonce. Looks to be well made but probably a bit warm to wear it out just yet...
Re: The post man's been ...
Tempted by one of those, but it looks really warm...L2R24 wrote: ↑Tue Dec 28, 2021 5:59 pm A DHB Aeron winter cap made with Polartec Alpha Direct from CRC
https://www.chainreactioncycles.com/dhb ... prod187231
Got mine in medium and fits snug on my 54cm bonce. Looks to be well made but probably a bit warm to wear it out just yet...
There are theories at the bottom of my jargon.
Re: The post man's been ...
@Boab - I tend to find Polartec Alpha breathes better than most insulated stuff, but we'll see. It'll be up against a old merino peaked winter cap by Giro, which whilst very good at covering the ears and keeping my head warm, used to soak up a lot of sweat. Caught out a few times over the Christmas holidays riding in low winter sun and not wearing a peaked cap to shade my eyes, so thought this might be just the ticket. The Alpha Direct lining does look quite dense though, so am expecting it to be warm!
-
- Posts: 2380
- Joined: Thu Dec 15, 2016 7:52 pm
- Location: Peoples Republic of Devon
Re: The post man's been ...
A domestic freeze drying machine
Not a dehydrator you understand but a fully functional freeze drier.
Primarily it’s for preserving our harvest but I foresee a future of diverse and possibly delicious homemade bikepacking meals
Not a dehydrator you understand but a fully functional freeze drier.
Primarily it’s for preserving our harvest but I foresee a future of diverse and possibly delicious homemade bikepacking meals
If you are going through hell, keep going.
WSC
WSC
Re: The post man's been ...
Nice, I looked at some quite a few years ago, but ££££'s so I dropped the idealune ranger wrote: ↑Wed Dec 29, 2021 5:09 pm A domestic freeze drying machine
Not a dehydrator you understand but a fully functional freeze drier.
Primarily it’s for preserving our harvest but I foresee a future of diverse and possibly delicious homemade bikepacking meals
Re: The post man's been ...
... and delivered a new pair of bibs for next summer. I've fancied trying a pair of the Pactimo Summit Stratos "12-Hour" Bibs for a while, but not being prepared to spend £180 on them, I've had to wait for one of their sales. The discount wasn't quite as much as this time last year, but given I paid a similar (ish) amount for my current dhb Aeron Lab XC Bibs which I'll probably never wear again, I figured I had nothing to loose.
There are theories at the bottom of my jargon.
- Dave Barter
- Posts: 3628
- Joined: Sun Jun 16, 2013 6:21 pm
Re: The post man's been ...
A BLTouch auto-levelling kit for my 3D printer
For any printerists out there this is a game changer as I was having to level nearly every print. I also setup Octoprint and can run/manage the printer remotely
For everyone else, as you were, nothing to see here.
For any printerists out there this is a game changer as I was having to level nearly every print. I also setup Octoprint and can run/manage the printer remotely
For everyone else, as you were, nothing to see here.
Elite keyboard warrior, DNF'er, Swearer
-
- Posts: 136
- Joined: Sat Sep 10, 2016 9:42 pm
Re: The post man's been ...
A pair of nukeproof flat pedals, as recommended by many on here. Not ridden flats for years, hopi g to go out for an early morning spin tomorrow, if I can remember how to thread pedals, probably whilst hungover.
-
- Posts: 8144
- Joined: Mon Mar 18, 2013 9:56 am
Re: The post man's been ...
A squat rack.
The home gym is almost complete, just in time for a New Years resolution
The home gym is almost complete, just in time for a New Years resolution
- ledburner
- Posts: 2035
- Joined: Mon Oct 12, 2020 8:47 am
- Location: The worsted place in West Yorkshire,
Re: The post man's been ...
???? Icreadcthatxsd Scot rack
I hope you think you know, what I might of exactly meant.
Warning - may contain value odded typos & ither mythspellings..
Warning - may contain value odded typos & ither mythspellings..