Vitus vitesse evo pro frame

Buy, sell, swap.

Moderators: Bearbonesnorm, Taylor, Chew

Post Reply
jaseisace
Posts: 176
Joined: Sat Jun 25, 2016 9:03 am

Vitus vitesse evo pro frame

Post by jaseisace »

IMG_5343.jpg
IMG_5343.jpg (31.75 KiB) Viewed 300 times
Hi Guys
This is the last of my roadie stuff I'm selling as I'm finding a gravel bike with two different sets of wheels covers 95% of all my riding when I'm not on a mtb.
Vitus Vitesse Evo Team Frameset 52CM (20.5") which equates to a small/medium
The bike has been previously assembled, and ridden for approximately 110 miles (to Welshpool and back) and as it came with ultegra di2 which I've transferred over to my gravel bike (with the addition of hydraulic shifters), it has then sat in a box for a couple of years while I entertained the idea of getting back into full roadie.
Frame has minor scratch marks near the bottom of the seat tube and minor scratch marks near the bottom steerer of the forks.
Included are x1 seat clamp and bolt plus the gear hangar I took off to store it.
The fork steerer has not been cut down from the original supplied length.
I may be able to find a headset for it, as I used the original FSA one on a mates bike.
Now this is Vitus’ top-end carbon frame, the Vitesse Evo. The Evo is the bike Continental team An Post-Chain Reaction has been racing for the two seasons( 2016/2017) so you'll get exactly the same frameset the pros ride. but it is a little bit special as it doesn't come with the standard BB386EVO bottom bracket, rather a standard BSA English thread, which in my mind is what all bottom brackets should be.
Frame weighs in at a respectable circa 1040grams
Seat tube is 27.2
£350 collected from anywhere between M6 junctions 6 -11
£375 posted further afield in mainland UK
cheers
Jase
jaseisace
Posts: 176
Joined: Sat Jun 25, 2016 9:03 am

Re: Vitus vitesse evo pro frame

Post by jaseisace »

IMG_5349.jpg
IMG_5349.jpg (29.47 KiB) Viewed 300 times
Post Reply