Wanted: QR adapters for Hope Pro 4
Moderators: Bearbonesnorm, Taylor, Chew
- thenorthwind
- Posts: 2627
- Joined: Thu Mar 10, 2016 6:07 pm
- Location: Newcastle
Wanted: QR adapters for Hope Pro 4
Anyone got any spare? Cheers
- Escape Goat
- Posts: 2616
- Joined: Thu Nov 01, 2018 10:41 pm
- Location: Not nearly close enough to Scotland...
Re: Wanted: QR adapters for Hope Pro 4
Front or rear?
My Movie Channel: https://tinyurl.com/YoutubeEG
My Instagram: https://www.instagram.com/allen.boardman
My Instagram: https://www.instagram.com/allen.boardman
- thenorthwind
- Posts: 2627
- Joined: Thu Mar 10, 2016 6:07 pm
- Location: Newcastle
Re: Wanted: QR adapters for Hope Pro 4
Are they different?
Rear, though I've got a pair of hubs, and I might swap the front one into the wheel currently on the bike, so I would take a front/rear set if there was one going.
Rear, though I've got a pair of hubs, and I might swap the front one into the wheel currently on the bike, so I would take a front/rear set if there was one going.
-
- Posts: 9471
- Joined: Tue Sep 20, 2016 8:19 am
- Location: Dewsbury, West Yorkshire
Re: Wanted: QR adapters for Hope Pro 4
Is the Pro 4 the sqme as the pro 2 adaptors. Can't see them being different to be fair. I have some pro2 ones from yesteryear...
- Escape Goat
- Posts: 2616
- Joined: Thu Nov 01, 2018 10:41 pm
- Location: Not nearly close enough to Scotland...
Re: Wanted: QR adapters for Hope Pro 4
I may have some rear ones in the garage you can have for free. I can check tonight.
My Movie Channel: https://tinyurl.com/YoutubeEG
My Instagram: https://www.instagram.com/allen.boardman
My Instagram: https://www.instagram.com/allen.boardman
Re: Wanted: QR adapters for Hope Pro 4
I've used Pro 2 QR adapters in Pro 4 and vice versa. The front and rear are different though.
- thenorthwind
- Posts: 2627
- Joined: Thu Mar 10, 2016 6:07 pm
- Location: Newcastle
Re: Wanted: QR adapters for Hope Pro 4
That makes things easy then.
Brilliant, thanks Sean. Happy to cover the postage and/or feed the bear.
Thanks as well Shaf. Will let you know if Sean doesn't fin any, assuming you don't want to undercut his offer
Brilliant, thanks Sean. Happy to cover the postage and/or feed the bear.
Thanks as well Shaf. Will let you know if Sean doesn't fin any, assuming you don't want to undercut his offer
Re: Wanted: QR adapters for Hope Pro 4
A look on the Hope website shows that the Pro 2 and Pro 4 front adapters have the same part number, so are the same.
For the rear, the non-drive side are the same. The drive side ones have different part numbers so may be different, but they may still work.
If the others above don't have the bits you need PM me and I'll rummage in the spares box.
For the rear, the non-drive side are the same. The drive side ones have different part numbers so may be different, but they may still work.
If the others above don't have the bits you need PM me and I'll rummage in the spares box.
Adventure without risk is Disneyland - Bikemonger
Re: Wanted: QR adapters for Hope Pro 4
Rear hub: Pro2 EVO and Pro4 use same adapters both sides for QR and 142 x 12. Older Pro2 (Non EVO) use different adapters.
Front: Pro2, Pro2 EVO and Pro4 all use same adapters
Front: Pro2, Pro2 EVO and Pro4 all use same adapters
Re: Wanted: QR adapters for Hope Pro 4
I should have remembered that as I've converted my Pro 2 (Non EVO) to EVO spec by using an EVO axle/spacer and freehub, I did it at the same time as going from QR to 142. The hub bodies are identical they just changed the axle/freehub for the EVO and only on the DS.
Adventure without risk is Disneyland - Bikemonger
Re: Wanted: QR adapters for Hope Pro 4
Think on some hubs you bought from me as supplied the rear with axle not fittedsean_iow wrote: ↑Wed Jan 13, 2021 11:21 amI should have remembered that as I've converted my Pro 2 (Non EVO) to EVO spec by using an EVO axle/spacer and freehub, I did it at the same time as going from QR to 142. The hub bodies are identical they just changed the axle/freehub for the EVO and only on the DS.
- thenorthwind
- Posts: 2627
- Joined: Thu Mar 10, 2016 6:07 pm
- Location: Newcastle
Re: Wanted: QR adapters for Hope Pro 4
OK, maybe not quite that simple, but shouldn't be a problem for my case.
One of you can probably tell me what the difference with the EVO hubs is, just out of interest... ?
One of you can probably tell me what the difference with the EVO hubs is, just out of interest... ?
Re: Wanted: QR adapters for Hope Pro 4
Original Pro 2 there is a step in the axle at the freehub, it useds smaller bearings in the freehub. It is 17mm dia at the wheel bearings and (I think) 15mm at the freehub.thenorthwind wrote: ↑Wed Jan 13, 2021 3:30 pm One of you can probably tell me what the difference with the EVO hubs is, just out of interest... ?
On the 2 EVO the axle is the same dia all the way through (17mm) so it has a freehub with larger bearings.
It doesn't matter on a QR Pro 2 as the hole down the middle of the axle is only sized for a skewer. If you have a 142x12 it uses a different axle with a 12mm hole down the centre but this means it is only 1.5mm thick at the section in the freehub. This has caused failures where the axle cracks/breaks. Hence why I convert to using EVO axles in mine as they are set up 142x12.
Adventure without risk is Disneyland - Bikemonger
- thenorthwind
- Posts: 2627
- Joined: Thu Mar 10, 2016 6:07 pm
- Location: Newcastle
Re: Wanted: QR adapters for Hope Pro 4
I see, makes sense. Thanks.sean_iow wrote: ↑Wed Jan 13, 2021 3:49 pm Original Pro 2 there is a step in the axle at the freehub, it useds smaller bearings in the freehub. It is 17mm dia at the wheel bearings and (I think) 15mm at the freehub.
On the 2 EVO the axle is the same dia all the way through (17mm) so it has a freehub with larger bearings.
It doesn't matter on a QR Pro 2 as the hole down the middle of the axle is only sized for a skewer. If you have a 142x12 it uses a different axle with a 12mm hole down the centre but this means it is only 1.5mm thick at the section in the freehub. This has caused failures where the axle cracks/breaks. Hence why I convert to using EVO axles in mine as they are set up 142x12.
Just realised I called you Sean before Allen. Can't see how that would cause any confusion Could you have a look for me please? Cheers.Escape Goat wrote: ↑Wed Jan 13, 2021 9:01 am I may have some rear ones in the garage you can have for free. I can check tonight.
https://www.youtube.com/watch?v=YT1aCuP ... y%27sVault