Seat Post Clamps
Moderators: Bearbonesnorm, Taylor, Chew
Seat Post Clamps
Does it matter which way round the seat-post clamp goes? The slot in my frame points forward so I've aligned the gap in the clamp with this as I always have.
I'd like to put a top tube bag there but the clamp is in the way. I was just going to turn it round to move it out of the way but Salsa's instructions say it should be aligned with the slot.
The slot in the collar should be over the slot in the seat tube of your frame, and the inner lip of the collar should sit flush on top of the seat tube
In reality it this the case? Does anyone use their clamp with the gap in the clamp on the opposite side to the slot in the seat tube?
I'd like to put a top tube bag there but the clamp is in the way. I was just going to turn it round to move it out of the way but Salsa's instructions say it should be aligned with the slot.
The slot in the collar should be over the slot in the seat tube of your frame, and the inner lip of the collar should sit flush on top of the seat tube
In reality it this the case? Does anyone use their clamp with the gap in the clamp on the opposite side to the slot in the seat tube?
Adventure without risk is Disneyland - Bikemonger
- Bearlegged
- Posts: 2342
- Joined: Fri Jun 30, 2017 5:00 pm
Re: Seat Post Clamps
I've always run separate clamps with the slot facing forward in an effort to reduce mud ingress, regardless of the slot in the frame. I am yet to die in a seatpost-clamp-related-fireball-of-doom, and doubt you will either.
Re: Seat Post Clamps
It'll be fine, spin it round
-
- Posts: 2380
- Joined: Thu Dec 15, 2016 7:52 pm
- Location: Peoples Republic of Devon
Re: Seat Post Clamps
I’m running mine back to front and everything works fine.
If you are going through hell, keep going.
WSC
WSC
-
- Posts: 9472
- Joined: Tue Sep 20, 2016 8:19 am
- Location: Dewsbury, West Yorkshire
Re: Seat Post Clamps
The way their instructions are (IMO) is more to do with leverage/clamping force... by aligning both gaps you get better clamping (probably and what Ive always thought makes .. makes more sense according to physics). But its probably negligible in the grand scheme of things and most likely only the dofferencw of torqueing the bolt and extra 0.5nm if gping against the instructions...
I've used the clamps and slots facing opposite ways (fot whatever reason) amd cannot remember getting any slippage issues Sean...
---------------
Short answer: do it and get that top tube bag stuck in there
I've used the clamps and slots facing opposite ways (fot whatever reason) amd cannot remember getting any slippage issues Sean...
---------------
Short answer: do it and get that top tube bag stuck in there
Re: Seat Post Clamps
I sometimes prefer the clamp slot opposed to the frame slot, as long as it stays put like that / it's a good quality clamp. Reduced the pinch-in effect that can damage carbon posts.
Re: Seat Post Clamps
Cheers all I'm going to make a top-tube bag sized to fit my MSR trailshot. It's obviously a lot easier if I don't have to include a cut-out in the corner for the clamp
Adventure without risk is Disneyland - Bikemonger
-
- Posts: 8144
- Joined: Mon Mar 18, 2013 9:56 am
Re: Seat Post Clamps
It makes no difference whatsoever.
Re: Seat Post Clamps
So, encouraged by the responses that it doesn't matter which way round the seat clamp goes I've knocked up a bag to house my trail-shot. I carefully measured the location of the frame bag straps and spaced the webbing ladder on the underside of the new bag so the same straps will fix both bags to the top-tube.
What I forgot to do is check the stand-over clearance with a bag in this location When stood over the top tube there is a bag/undercarriage conflict of interest
Easily solved by moving the bag to the front of the top-tube..... but in that case I could have just used a commercial bag? But luckily the webbing ladder still aligns with the existing bag.
Although the end of the top bag doesn't line up with the end of the frame bag so another strap is required to hold the end down as the top bag lifts up when I close the zip I think a DeWidget might be needed to keep it upright, I'll have to load it up and give it a test.
What I forgot to do is check the stand-over clearance with a bag in this location When stood over the top tube there is a bag/undercarriage conflict of interest
Easily solved by moving the bag to the front of the top-tube..... but in that case I could have just used a commercial bag? But luckily the webbing ladder still aligns with the existing bag.
Although the end of the top bag doesn't line up with the end of the frame bag so another strap is required to hold the end down as the top bag lifts up when I close the zip I think a DeWidget might be needed to keep it upright, I'll have to load it up and give it a test.
Adventure without risk is Disneyland - Bikemonger
- whitestone
- Posts: 7913
- Joined: Thu Dec 04, 2014 10:20 am
- Location: Skipton(ish)
- Contact:
Re: Seat Post Clamps
Sean, could you turn the bag 90 degrees so the long dimension is against the seat post? May not get interference that way
Better weight than wisdom, a traveller cannot carry
Re: Seat Post Clamps
Sometimes I'm so slow on the uptake I wonder how I've survived this long I'll give it a go, cheers
Adventure without risk is Disneyland - Bikemonger