Ergons on Jones Loops?

Talk about anything.

Moderators: Bearbonesnorm, Taylor, Chew

Post Reply
User avatar
99percentchimp
Posts: 1057
Joined: Sat Jun 25, 2011 7:46 pm
Location: North Wales!

Ergons on Jones Loops?

Post by 99percentchimp »

Looking for illustrations and recommendations. I have Ergons with mini 'bar ends' on another bike with normal bars but not tried then on the Jones bars - what you got?
Conquistador of the pointless
https://www.flickr.com/photos/99percentchimp/
Teetosugars
Posts: 696
Joined: Wed Apr 10, 2013 4:53 pm
Location: Cheshire

Re: Ergons on Jones Loops?

Post by Teetosugars »

Ergons, on Jones bars,.

Love mine.

Image

Apologies for the crap bar taping... I intend to try and re-do it.. :oops:

Image
User avatar
fatbikephil
Posts: 6589
Joined: Wed Apr 02, 2014 10:51 pm
Location: Fife
Contact:

Re: Ergons on Jones Loops?

Post by fatbikephil »

+1 - one thing that does annoy me a bit tho - on really steep descents bumps make your hands slip forwards of the wide bit - its because the loop bars are so swept back. For info I tried the ergon grips that flare out at the front as well as back designed for swept bars and they were even worse for this.
Sarah
Posts: 177
Joined: Sat Jul 16, 2016 5:51 pm
Location: Lancashire

Re: Ergons on Jones Loops?

Post by Sarah »

Works for me. Got to get angle set up dead right. :-bd
Sarah
ianfitz
Posts: 3642
Joined: Thu Jan 24, 2013 1:33 pm

Re: Ergons on Jones Loops?

Post by ianfitz »

Me too. Both bikes.

Agree with htrider but worth it for the comfort. I've never had hand issues with this setup. Never.

Would be a waste with the bar end version though. Pointing in the wrong direction.
Image
tommid
Posts: 264
Joined: Mon Feb 06, 2012 9:24 pm
Location: Peoples Republic of Norfolk

Re: Ergons on Jones Loops?

Post by tommid »

I moved from Ergons to ESIs as I didn't take to the Ergons on my Jones bars, they didn't really work.
I couldn't get the angle right and I found that my hands would slip off the front over bumps.
User avatar
benp1
Posts: 4062
Joined: Sat Dec 07, 2013 7:36 pm
Location: South Downs

Re: Ergons on Jones Loops?

Post by benp1 »

I had GP3s previously. Took them off for GP1s so I could fit pogies

The bar ends worked well, but aren't great in tight singletrack as they're very hook like so grab branches and brambles very easily!
ianfitz
Posts: 3642
Joined: Thu Jan 24, 2013 1:33 pm

Re: Ergons on Jones Loops?

Post by ianfitz »

benp1 wrote:I had GP3s previously. Took them off for GP1s so I could fit pogies

The bar ends worked well, but aren't great in tight singletrack as they're very hook like so grab branches and brambles very easily!
On joneses? Don't they stick out at an odd angle?

I used some on some 5 degree sweep bars. They were good on there...
Image
User avatar
benp1
Posts: 4062
Joined: Sat Dec 07, 2013 7:36 pm
Location: South Downs

Re: Ergons on Jones Loops?

Post by benp1 »

Yep, very odd!

They still worked pretty well though, gave me another hand position. And looked very niche!

They would work better on wider bars (i.e. 710 over 660) as you lose a bit of the width for holding the grips normally as the bar end is there

The only downsides we're looking weird and catching on down narrow tracks. And pogies don't work well with them
Post Reply