29er Forks 1 1/8 Straight Steerer WTD

Buy, sell, swap.

Moderators: Bearbonesnorm, Taylor, Chew

Post Reply
User avatar
Escape Goat
Posts: 2614
Joined: Thu Nov 01, 2018 10:41 pm
Location: Not nearly close enough to Scotland...

29er Forks 1 1/8 Straight Steerer WTD

Post by Escape Goat »

Hi

Just on the lookout for some QR 1 1/8 straight steerer forks for my Inbred SS - the el mariachi SS is now geared (for now) and suspended so the OnOne is now going to be the SS commuter hack bike.

not loads of dosh though, the OO isn't as nice as the Salsa. Hoping to keep the price as low as possible. Ideally rigid please.

Thanks
User avatar
fatbikephil
Posts: 6589
Joined: Wed Apr 02, 2014 10:51 pm
Location: Fife
Contact:

Re: 29er Forks 1 1/8 Straight Steerer WTD

Post by fatbikephil »

Alan, did I include a set of forks with that On one frame?? my memory fails me...
HUX
Posts: 486
Joined: Mon Jan 16, 2012 6:51 pm

Re: 29er Forks 1 1/8 Straight Steerer WTD

Post by HUX »

Mk1 Swift forks any good to you? Short steerer though, 170mm I think
User avatar
Escape Goat
Posts: 2614
Joined: Thu Nov 01, 2018 10:41 pm
Location: Not nearly close enough to Scotland...

Re: 29er Forks 1 1/8 Straight Steerer WTD

Post by Escape Goat »

fatbikephil wrote: Thu Jan 06, 2022 1:50 pm Alan, did I include a set of forks with that On one frame?? my memory fails me...
I was going to accept them but said just the frame. Think stu at work got them instead from you 😂
HUX wrote: Thu Jan 06, 2022 2:30 pm Mk1 Swift forks any good to you? Short steerer though, 170mm I think
Forgive me, what are they?
HUX
Posts: 486
Joined: Mon Jan 16, 2012 6:51 pm

Re: 29er Forks 1 1/8 Straight Steerer WTD

Post by HUX »

Singular Swift steel forks. 485mmc-c. A good quality fork.
User avatar
Escape Goat
Posts: 2614
Joined: Thu Nov 01, 2018 10:41 pm
Location: Not nearly close enough to Scotland...

Re: 29er Forks 1 1/8 Straight Steerer WTD

Post by Escape Goat »

Ah, just spotted the steerer length. The ht on the oo is hooge.

Thanks though.
User avatar
fatbikephil
Posts: 6589
Joined: Wed Apr 02, 2014 10:51 pm
Location: Fife
Contact:

Re: 29er Forks 1 1/8 Straight Steerer WTD

Post by fatbikephil »

Escape Goat wrote: Thu Jan 06, 2022 2:46 pm

I was going to accept them but said just the frame. Think stu at work got them instead from you 😂

Hmm, I thought I'd sold them to you or the person who bought your PX frame's successor a few years ago, however apparently not as I've just found them in the loft! So I have here a pair of old style Surly KM forks, black with a few marks and bits of rust but nothing too bad. They have canti mounts as well as an IS disc mount and the steerer is 200mm long. AC is 475mm. They were bought at the same time as your frame and whilst I may have had a reason for not offering you them with the frame, I don't know what it was and I really can't see me ever needing them again. So available if you want. I'll clean them up and bung a pic up later. I'll try and think of a price but any reasonable offer accepted
User avatar
Richpips
Posts: 2163
Joined: Fri Oct 25, 2013 2:57 pm
Location: Peak District

Re: 29er Forks 1 1/8 Straight Steerer WTD

Post by Richpips »

Allen, Salsa Firestarter fork silver QR 100mm spacing 21cm steerer.

£60 posted.
User avatar
Escape Goat
Posts: 2614
Joined: Thu Nov 01, 2018 10:41 pm
Location: Not nearly close enough to Scotland...

Re: 29er Forks 1 1/8 Straight Steerer WTD

Post by Escape Goat »

Let me know Phil on yours, if not rich may be perfect.do they have cage mounts on? Not fussed if not.
User avatar
fatbikephil
Posts: 6589
Joined: Wed Apr 02, 2014 10:51 pm
Location: Fife
Contact:

Re: 29er Forks 1 1/8 Straight Steerer WTD

Post by fatbikephil »

Image
They have cleaned up well enough although these pre-date Surly ED coating everything and using a nice thick powder coat so a few minor scratches and scrapes showing surface rust but nothing remotely of concern structurally. Inside the legs and steerer is fine as I waxoyled them. If Rich wants £60 for a set of firestarters that would make these worth £30 posted as the fire starters are very nice, with stainless steel drop outs (I also have a pair and I aint selling :grin: ) I would say that On one recommended a 475 AC fork for the 29er inbreds but I suspect that the 10mm extra of the fire starters will make BA difference. These come with the canti mounts (I amazed myself at finding them) if you want a retro braking set up......
Phil
User avatar
Richpips
Posts: 2163
Joined: Fri Oct 25, 2013 2:57 pm
Location: Peak District

Re: 29er Forks 1 1/8 Straight Steerer WTD

Post by Richpips »

Escape Goat wrote: Fri Jan 07, 2022 1:58 pm Let me know Phil on yours, if not rich may be perfect.do they have cage mounts on? Not fussed if not.
Cage mounts, yes.
User avatar
Escape Goat
Posts: 2614
Joined: Thu Nov 01, 2018 10:41 pm
Location: Not nearly close enough to Scotland...

Re: 29er Forks 1 1/8 Straight Steerer WTD

Post by Escape Goat »

Let me have a think which to go for if that's OK?
Post Reply