Page 6 of 9
Re: Lock-down projects
Posted: Sat Jan 23, 2021 8:36 pm
by trob6
thenorthwind wrote: ↑Sat Jan 23, 2021 6:32 pm
Nice one Tim.
I'm impressed you got the roof on straight with your choice of on the job refreshment
trob6 wrote: ↑Fri Jan 22, 2021 10:05 pm
Thanks Dave
I always think safety wine is very important working at height
I wondered if anyone would spot that so 10 points to you, it was in fact water!
Re: Lock-down projects
Posted: Sat Jan 23, 2021 9:19 pm
by thenorthwind
trob6 wrote: ↑Sat Jan 23, 2021 8:36 pm
Thanks Dave
I always think safety wine is very important working at height
I wondered if anyone would spot that so 10 points to you, it was in fact water!
Safety wine
I'm stealing that one.
Re: Lock-down projects
Posted: Sun Jan 24, 2021 6:18 am
by ledburner
It called a French spirt level
Re: Lock-down projects
Posted: Sun Jan 24, 2021 6:44 am
by ledburner
Made for Shaf his new tool roll.
I think it's really for the boss, Missus S!
Re: Lock-down projects
Posted: Tue Jan 26, 2021 3:04 pm
by numplumz
Bearbonesnorm wrote: ↑Sat Jan 23, 2021 2:38 pm
Similar lines Jack - I've just crayoned out a down-tube mounted crud catcher come trowel
Oh yes combine the two, good idea Stu.....................I'd probably slash my leg open on it though
Did think of a trowel come temporary bike stand prop too.
Re: Lock-down projects
Posted: Tue Jan 26, 2021 3:08 pm
by redefined_cycles
ledburner wrote: ↑Sun Jan 24, 2021 6:44 am
Made for Shaf his
new tool roll.
I think it's really for the boss, Missus S!
Thats gorgeous. This one is for the missus but I might get you to make me another please Dan. If you can be bothered. To go on back of my door in the outhouse. It's all rather messy (the outhouse and shed).
Re: Lock-down projects
Posted: Tue Jan 26, 2021 11:54 pm
by ledburner
The second one should be easier as I've already made one..
Re: Lock-down projects
Posted: Sat Jan 30, 2021 5:20 pm
by Martin B
I've got some Shed-envy going on having been following this post. With two young children i have very little time to devote to big projects and over the various lockdowns have devoted myself to my Singer sewing machine in the evenings and made some bags.
Lockdown mk1
two stem cells (one a drawcord and the other a rolltop)and also a rolltop frame bag:
20210130_145248 by
Martin Brown, on Flickr
A lesson learnt from using the rolltop frame bag was to either shorten the straps on the drive side/ stitch them to higher up or make sure you always buckle it up properly and don't cycle off allowing the strap to get caught between the chain and ring ripping the stitching of the webbing as you grind to a halt.
On the inside of the frame bag i added a 100mm wide velcro loop strips to each side and made up some cord adjusters with velcro hook tabs so i can cinch the sides in around gear to stop the bag billowing out and also it keeps cerain items in place when you pack or remove items:
20210130_145417 by
Martin Brown, on Flickr
Also made a tool/spares pouch out of an old Patagonia jacket and spare bit of cordura.the dimensions were made to fit in the bottom of the frame bag:
20210130_145440 by
Martin Brown, on Flickr
Handle bar harness:
20210130_145555 by
Martin Brown, on Flickr
20210130_145602 by
Martin Brown, on Flickr
I went on to make various stem cells and handlebar harnesses for my friends, which helped cover the cost of the materials for my bags
Current Lockdown 2 projects are:
A bivi bag for my 6 year old daughter for our post lockdown bikepacking bivi trip. It's made out of 2 old 3ply goretex jackets that I had kicking about. My daughter already loves it and is quite pleased I kept the sleeves as she can get her hands out while still being toasty warm in her sleeping bag. Just have to glue/tape the seams a bit.
Myog bivi bag by
Martin Brown, on Flickr
Other projects and ideas on the go just now include a 4 man 'bothy shelter' using the Hilleberg fabric that I ordered a few months ago and also I'm looking at making a rolltop bag that has the closure along the long edge for easier packing (like a basket bag but with a rounded bottom) and placing it in the handlebar harness.... if anyone has made a rolltop basket bag similar I'd be keen to see some pictures to give me ideas for my prototype. Also got plans for a solo sized tarp (again Hilleberg fabric which i have plenty of) and had thoughts last night at work about replacing the elastic cord on the handlebar harness with some form of mesh stuff panel to keep waterproof jacket/gloves etc in.
One day, I'll get on to building a shed/workshop to be proud of. Might even move the sewing machine out there for some quiet time
Re: Lock-down projects
Posted: Sat Jan 30, 2021 5:48 pm
by Bearbonesnorm
Superb stuff there.
Re: Lock-down projects
Posted: Sat Jan 30, 2021 5:59 pm
by RIP
The jackets-bivvy-bag is ace!
Re: Lock-down projects
Posted: Sat Jan 30, 2021 8:35 pm
by Martin B
RIP wrote: ↑Sat Jan 30, 2021 5:59 pm
The jackets-bivvy-bag is ace!
I hereby declare it to be called the Jivvy bag.
I can remember seeing a bivi bag similar to it before, but can't remember where. I don't think it had pockets to keep all the essential items that my daughter will bring though
Re: Lock-down projects
Posted: Sat Jan 30, 2021 8:56 pm
by Verena
Martin B wrote: ↑Sat Jan 30, 2021 8:35 pm
RIP wrote: ↑Sat Jan 30, 2021 5:59 pm
The jackets-bivvy-bag is ace!
I hereby declare it to be called the Jivvy bag.
I can remember seeing a bivi bag similar to it before, but can't remember where. I don't think it had pockets to keep all the essential items that my daughter will bring though
I saw these years and years ago in my youf, on camping trips where our vicar had one - it's a classic/old German army design I think... waterproof, sleeping bag, sleeves, zip at the bottom, basically the original "bed in a bag":
https://www.raeer.com/shopexd.asp?id=14765?var=00000
Re: Lock-down projects
Posted: Sat Jan 30, 2021 9:03 pm
by trob6
I really like the Jivvy bag, I bet your daughter cant wait!
Re: Lock-down projects
Posted: Sat Jan 30, 2021 9:32 pm
by Dean
Martin B wrote: ↑Sat Jan 30, 2021 8:35 pm
RIP wrote: ↑Sat Jan 30, 2021 5:59 pm
The jackets-bivvy-bag is ace!
I hereby declare it to be called the Jivvy bag.
I can remember seeing a bivi bag similar to it before, but can't remember where. I don't think it had pockets to keep all the essential items that my daughter will bring though
Hilleberg Bivanorak?
Re: Lock-down projects
Posted: Sat Jan 30, 2021 10:53 pm
by Martin B
That's the one Dean
Re: Lock-down projects
Posted: Sun Jan 31, 2021 2:00 am
by ledburner
Martin B wrote: ↑Sat Jan 30, 2021 5:20 pm
I've got some Shed-envy going on
devoted myself to my Singer sewing machine in the evenings and made some bags.
I think there may be a support forum for that
Also made a tool/spares pouch out of an old Patagonia jacket and spare bit of cordura.the dimensions were made to fit in the bottom of the frame bag:
20210130_145440 by
Martin Brown, on Flickr
Tool bag from Pata-Gucci? I can't decide if that's up
cycling or down cycling [/]
What did you use for stiffener/support stays inside.
One day, I'll get on to building a shed/workshop to be proud of. Might even move the sewing machine out there for some quiet time
Your better half will have some quiet time aswell.
My handle bar bag & harness.
On this thread. https://bearbonesbikepacking.co.uk/php ... og#p242877
And this, better pictures
https://bearbonesbikepacking.co.uk/php ... 74#p235664
Like you I get a lot of pleasure making gear..
Re: Lock-down projects
Posted: Sun Jan 31, 2021 12:50 pm
by pistonbroke
If we're widening the definition of "project" to include construction jobs, our lockdown activity mainly involved using this
to turn this
Into this
We didn't get it finished until mid June as the filtration pump needed replacing and the local quarry that supplied the sand and gravel didn't reopen until mid May, it took 42 tonnes of sand, cement and gravel, all of which had to be barrowed the 50m from the nearest access point for the lorry. Kept me fit.
Currently building a pergola to provide shade for the eating area.
Re: Lock-down projects
Posted: Sun Jan 31, 2021 4:24 pm
by Martin B
ledburner wrote: ↑Sun Jan 31, 2021 2:00 am
Martin B wrote: ↑Sat Jan 30, 2021 5:20 pm
What did you use for stiffener/support stays inside.
I used 2mm cosplay foam (
https://www.ebay.co.uk/itm/Cosplay-Eva- ... 890.l49292)
between the inner and outer face. I then got one of the thicker-ish (1.5 -2mm) flexible chopping boards and cut 2 strips that were a bit narrower than the 40mm webbing and slid them in behind it. Then stitched the bottom of the webbing to hold them in place.
Hopefully that makes sense. If not I might be making another one up soon and i'll take photos.
Great effort on your bags and harness. I concluded that by the time I made several prototypes of a saddle bag it would be better to just buy one. Ended up getting an Acepac holster one from here for Crimbo.... well chuffed with it.
Re: Lock-down projects
Posted: Sun Jan 31, 2021 4:25 pm
by Dave Barter
Firstly. Go easy as I am using lockdown to get to grip with music recording. It's really really hard comapred to the simple 4-track I used to use many years ago.
I decided to try and recreate a song from my youth which I've always loved. It's Dead and Buried by Alien Sex Fiend. 90% of you will have left the thread already, but after a few weekends learning a DAW and messing about I've managed to get a version that is not a million miles away from the original. I need to get better at mixing which is ridiculously hard (for me). But I learnt a lot doing this. All vocals an instruments are me so you know what's coming.
I even made a little video to go with it as the original was so long ago videos hadn't been invented.
https://www.youtube.com/watch?v=eaTKduElfz8
Re: Lock-down projects
Posted: Sun Jan 31, 2021 4:27 pm
by Martin B
pistonbroke wrote: ↑Sun Jan 31, 2021 12:50 pm
it took 42 tonnes of sand, cement and gravel, all of which had to be barrowed the 50m from the nearest access point for the lorry.
Good effort
Re: Lock-down projects
Posted: Sun Jan 31, 2021 5:39 pm
by sean_iow
wow, Dave wins, thread closed
I'd have played that back when I was DJing in The Boiler Room* in the 90s and I'm sure no one would have realised it wasn't by ASF**
* Alternative club we used to have in the backroom of a local pub on a Saturday night
** Most of the clubbers were so out of it they didn't have a clue what I was playing most of the time.
Re: Lock-down projects
Posted: Sun Jan 31, 2021 5:44 pm
by Bearlegged
Dave Barter wrote: ↑Sun Jan 31, 2021 4:25 pmAll vocals an instruments are me so you know what's coming.
Lots of swearing?
Re: Lock-down projects
Posted: Mon Feb 01, 2021 2:50 pm
by Fat tyre kicker
Dave, that's ace, loved it, good skills, interesting comment on there too
Re: Lock-down projects
Posted: Mon Feb 01, 2021 3:42 pm
by ledburner
Great aswell, not quite my taste in music but I can appreciate the skill involved.
Re: Lock-down projects
Posted: Thu Feb 04, 2021 9:57 pm
by Borderer
Some serious talent in this place. Love the track and vid Dave, and Martin's bivvy bag is ace. Back in the 80's I worked with a guy who used to sleep in a thing like that. It also had a way of zipping into two legs, which he used to do in the morning and then wander in to work wearing it. He'd just wear it all day as his normal clothes. He was very smelly.