Page 376 of 459

Re: The post man's been ...

Posted: Thu Feb 04, 2021 6:00 pm
by voodoo_simon
^^^
Liking that Ton :-bd

Re: The post man's been ...

Posted: Thu Feb 04, 2021 6:25 pm
by Dave Barter
Bearbonesnorm wrote: Thu Feb 04, 2021 5:44 pm
It had better be as good as you said Stu
You'll be made up or your money back and 9 out of 10 cats prefer it.
Well it failed at first hurdle as they put paper instructions IN the flask and I can’t get them out

Re: The post man's been ...

Posted: Thu Feb 04, 2021 6:29 pm
by thenorthwind
Nice, ton :cool:

More mundane stuff for me - pair of freehub bearings for a new (to me) Hope wheel. £17's worth, and that's only half the bearings from one wheel: bike, eh.

Fortunately they go through the letterbox... despite being in to receive parcels being one of the perks of WFH, this week I've missed the post 3 times due to being intractably involved in virtual meetings :roll:

Re: The post man's been ...

Posted: Thu Feb 04, 2021 6:42 pm
by Bearbonesnorm
Well it failed at first hurdle as they put paper instructions IN the flask and I can’t get them out
To be fair, I got mine out, so that make me think it's perhaps you rather than the flask which is letting the side down ... you've not signed up for the Crystal Maze any time soon have you?

Re: The post man's been ...

Posted: Thu Feb 04, 2021 7:00 pm
by Dave Barter
Bearbonesnorm wrote: Thu Feb 04, 2021 6:42 pm
Well it failed at first hurdle as they put paper instructions IN the flask and I can’t get them out
To be fair, I got mine out, so that make me think it's perhaps you rather than the flask which is letting the side down ... you've not signed up for the Crystal Maze any time soon have you?
There are too many variables here to compare competences. Did you use tools? We’re yours folded in the same manner as mine? I used to watch the Crystal Maze a lot but don’t remember Richard stuffing a flask with paper and then sticking it in a room for a load of middle manager types to scream at. I’m going to the basement for some long nosed pliers.

Re: The post man's been ...

Posted: Thu Feb 04, 2021 7:04 pm
by ScotRoutes
You need instructions on how to use a flask?

If not, just fill it with hot water, wait for it to soften and pour it out.

Re: The post man's been ...

Posted: Thu Feb 04, 2021 7:11 pm
by ledburner
Dave Barter wrote: Thu Feb 04, 2021 6:25 pm
Bearbonesnorm wrote: Thu Feb 04, 2021 5:44 pm
It had better be as good as you said Stu
You'll be made up or your money back and 9 out of 10 cats prefer it.
Well it failed at first hurdle as they put paper instructions IN the flask and I can’t get them out
An excused to buy long nosed plier, a long pair of tweezer. Or hook the with a spoke...
Unless all you have a re straight pull ones/are ultra minimalistic.

Edit. In the mean time you've realised this, as I was writing

Re: The post man's been ...

Posted: Thu Feb 04, 2021 7:14 pm
by Dave Barter
ScotRoutes wrote: Thu Feb 04, 2021 7:04 pm You need instructions on how to use a flask?
Nope. So why put them in there?

Re: The post man's been ...

Posted: Thu Feb 04, 2021 7:14 pm
by Lazarus
These used to be my go to, I thought they had completely stopped production ages ago
Yeah Mk 1 I got "lucky" with Wiggle ebay selling one so I got a ti one for just under £50 - possibly fitted as its just the saddle but no marks on rails or seat
They are discontinued but you can find odd colour scheme ones online - this is just plain black.
I got another one of them earlier in the year wiith a rip in the groove which i repaired with sho gloo and is holding up fine.
Not sure there will be many more available hence hoarding. so I managed to get three [other two are cro mo] in the last year or so - one of them is an awful lime green colour that in no way matches the "british racing green" salasa it is on.

Re: The post man's been ...

Posted: Thu Feb 04, 2021 7:20 pm
by ScotRoutes
Dave Barter wrote: Thu Feb 04, 2021 7:14 pm
ScotRoutes wrote: Thu Feb 04, 2021 7:04 pm You need instructions on how to use a flask?
Nope. So why put them in there?
Not everyone is as clever as you Dave :lol:

Re: The post man's been ...

Posted: Thu Feb 04, 2021 11:56 pm
by redefined_cycles
Gorgeous little insoles arrived today as advised by Gian. Pedag Viva Winters for £17 from RaynaudsDisease.com :-bd sadly Colins van insulation had to be removed to slide em in :grin:

Re: The post man's been ...

Posted: Thu Feb 04, 2021 11:58 pm
by JohnClimber
Image

A spare Rohloff sprocket from Charlie the ex Bikemongers personal box of bits

Re: The post man's been ...

Posted: Fri Feb 05, 2021 12:11 am
by redefined_cycles
JohnClimber wrote: Thu Feb 04, 2021 11:58 pm Image

A spare Rohloff sprocket from Charlie the ex Bikemongers personal box of bits
That looks gorgeous. All this talk of Rohloff, makes me want one. :o

Re: The post man's been ...

Posted: Fri Feb 05, 2021 1:09 am
by ledburner
redefined_cycles wrote: Fri Feb 05, 2021 12:11 am
JohnClimber wrote: Thu Feb 04, 2021 11:58 pm Image

A spare Rohloff sprocket from Charlie the ex Bikemongers personal box of bits
That looks gorgeous. All this talk of Rohloff, makes me want one. :o
If you want you can have ride on mine to see what's it's like... But the deposit and covid cleanese service charges may be prohibitive :grin:

Re: The post man's been ...

Posted: Fri Feb 05, 2021 2:05 am
by Fat tyre kicker
Bloody lovely bike Ton :-bd :-bd
Collected a pair of Wtb 27.5 x 2.8 tyres to go with my 27.5+ rims....
Seems to be heading like a new build after all.....

Re: The post man's been ...

Posted: Fri Feb 05, 2021 9:01 am
by redefined_cycles
Fat tyre kicker wrote: Fri Feb 05, 2021 2:05 am Bloody lovely bike Ton :-bd :-bd
Got a pic :smile:

Re: The post man's been ...

Posted: Fri Feb 05, 2021 9:57 am
by ton
Tony Ti 2.jpg
(133.01 KiB) Downloaded 131 times

here you go Shaf

Re: The post man's been ...

Posted: Fri Feb 05, 2021 11:37 am
by RIP
Ti sheets. Windshields, construction, for the uses of.

Image

Re: The post man's been ...

Posted: Fri Feb 05, 2021 11:41 am
by Bearbonesnorm
What thickness is that Reg? 0.1mm?

Re: The post man's been ...

Posted: Fri Feb 05, 2021 11:54 am
by redefined_cycles
ton wrote: Fri Feb 05, 2021 9:57 am Tony Ti 2.jpg


here you go Shaf
A Salsa Rohloff'd Ti. That really is beautiful. Hope it lasts well for you and carries you well :-bd Thanks...

Re: The post man's been ...

Posted: Fri Feb 05, 2021 12:01 pm
by RIP
Bearbonesnorm wrote: Fri Feb 05, 2021 11:41 am What thickness is that Reg? 0.1mm?
Yep. Wondered about 0.2 but 0.1 is just right. Holds shape well. My 750 shield is still going strong.

I wouldn't be surprised if some sticky-backed-plastic is also involved somewhere in my Blue Peter-ish construction attempt :smile: .

Re: The post man's been ...

Posted: Fri Feb 05, 2021 12:40 pm
by ledburner
RIP wrote: Fri Feb 05, 2021 11:37 am Ti sheets. Windshields, construction, for the uses of.

Image
Bearbonesnorm wrote: Fri Feb 05, 2021 11:41 am What thickness is that Reg? 0.1mm?
Your going to have to carry some extra ballast to stop the £££ ultra, flyweight windshield blowing away! :grin:

Re: The post man's been ...

Posted: Fri Feb 05, 2021 12:43 pm
by ledburner
ledburner wrote: Fri Feb 05, 2021 12:40 pm
RIP wrote: Fri Feb 05, 2021 11:37 am Ti sheets. Windshields, construction, for the uses of.

Image
Bearbonesnorm wrote: Fri Feb 05, 2021 11:41 am What thickness is that Reg? 0.1mm?
Your going to have to carry some extra ballast to stop the £££ ultra, flyweight windshield blowing away! :grin:
Edit: Seriously where did you 'par-chase' this exotic material?

Re: The post man's been ...

Posted: Fri Feb 05, 2021 1:00 pm
by Fat tyre kicker
Reg....is that not the extra thick Turkey foil being sold off from your
Local convenience shop ?

Re: The post man's been ...

Posted: Fri Feb 05, 2021 1:36 pm
by ledburner
ledburner wrote: Fri Feb 05, 2021 12:43 pm
ledburner wrote: Fri Feb 05, 2021 12:40 pm
RIP wrote: Fri Feb 05, 2021 11:37 am Ti sheets. Windshields, construction, for the uses of.

Image
Bearbonesnorm wrote: Fri Feb 05, 2021 11:41 am What thickness is that Reg? 0.1mm?
Your going to have to carry some extra ballast to stop the £££ ultra, flyweight windshield blowing away! :grin:
Edit: Seriously where did you 'par-chase' this exotic material?
Hey, Don't go winding Reg up. :sad:
- A little tact & deplomicy please, (were not Handforth parish council meeting!). :o
He still hasn't let on where he has pilfered the stuff from. :grin: