Idea sketched and cut from a bit of 1.6mm mild steel plate
![Image](https://live.staticflickr.com/65535/52528641131_26c7840d56_c.jpg)
Folded
![Image](https://live.staticflickr.com/65535/52528641116_0a846b2432_c.jpg)
And painted
![Image](https://live.staticflickr.com/65535/52528641096_63fbd7aced_c.jpg)
Installed under the lower bearing seat.
![Image](https://live.staticflickr.com/65535/52528926779_83c577473b_c.jpg)
I had planned to use a bit of 20mm webbing through it but after a trial fit discovered this was more faff than I wanted. Folded up a rectangular ring from a bit of 1.8mm stainless steel wire and fixed to the bag with some velcro
![Image](https://live.staticflickr.com/65535/52529120170_aafe3f96e1_c.jpg)
Note that I've also fitted better straps. The ring can simple be slipped over the bracket before fixing the bag to the bars.
![Image](https://live.staticflickr.com/65535/52528178287_a6085111fb_c.jpg)
Survived this morning's commute. There is some movement but not too much and it keeps the bag off the headtube
![Image](https://live.staticflickr.com/65535/52528641036_81936fa914_c.jpg)