FS: Bits from Stan!
Moderators: Bearbonesnorm, Taylor, Chew
-
- Posts: 9378
- Joined: Tue Sep 20, 2016 8:19 am
- Location: Dewsbury, West Yorkshire
FS: Bits from Stan!
If anyone wants em. They're lovely and smooth though look a bit rough around the edges...
Postage at cost and a donation to that there RNLI... please
If you really want to be picky then ever so slightly grouchy. But being V8 (as long as the tiny hex nut comes out) you can just flush/purge em with grease and Stuarts yer uncle.
Only reason for the sale is cos I'm trying to give the Butcher (Ramin 3+) some much needed mollycoddling. These don't look very butch either... ( if I'm allowed to say that)...
Postage at cost and a donation to that there RNLI... please
If you really want to be picky then ever so slightly grouchy. But being V8 (as long as the tiny hex nut comes out) you can just flush/purge em with grease and Stuarts yer uncle.
Only reason for the sale is cos I'm trying to give the Butcher (Ramin 3+) some much needed mollycoddling. These don't look very butch either... ( if I'm allowed to say that)...
Last edited by redefined_cycles on Sun Feb 21, 2021 11:52 pm, edited 14 times in total.
- ledburner
- Posts: 2035
- Joined: Mon Oct 12, 2020 8:47 am
- Location: The worsted place in West Yorkshire,
Re: For RNLI DMR V8
I'm interested, I'll make donation...
I hope you think you know, what I might of exactly meant.
Warning - may contain value odded typos & ither mythspellings..
Warning - may contain value odded typos & ither mythspellings..
-
- Posts: 9378
- Joined: Tue Sep 20, 2016 8:19 am
- Location: Dewsbury, West Yorkshire
Re: For RNLI DMR V8
Nice. They're yours. Free postage aswell... Winner winner chicken dinner
-
- Posts: 9378
- Joined: Tue Sep 20, 2016 8:19 am
- Location: Dewsbury, West Yorkshire
Re: For RNLI DMR V8
Dan... let me know when to drop em off. Can drop to a safe place at yours...
- ledburner
- Posts: 2035
- Joined: Mon Oct 12, 2020 8:47 am
- Location: The worsted place in West Yorkshire,
Re: For RNLI DMR V8
Yep can do you can also collect the first wall of pockets bag..
I hope you think you know, what I might of exactly meant.
Warning - may contain value odded typos & ither mythspellings..
Warning - may contain value odded typos & ither mythspellings..
-
- Posts: 9378
- Joined: Tue Sep 20, 2016 8:19 am
- Location: Dewsbury, West Yorkshire
Re: For Maxxis Chronicles
Not sure how many Chronicles I'd like to sell. In 29er flavour and possibly in 27.5 also. 3.0 width.
£35 each posted
Not for RNLI this one and money goes straight to my pocket (sorry). First refusal will be given to Allen off course
£35 each posted
Not for RNLI this one and money goes straight to my pocket (sorry). First refusal will be given to Allen off course
- Escape Goat
- Posts: 2606
- Joined: Thu Nov 01, 2018 10:41 pm
- Location: Not nearly close enough to Scotland...
Re: FS: Maxxis Chronicles
What you got there shaf, 29 x 3.0?
My Movie Channel: https://tinyurl.com/YoutubeEG
My Instagram: https://www.instagram.com/allen.boardman
My Instagram: https://www.instagram.com/allen.boardman
-
- Posts: 9378
- Joined: Tue Sep 20, 2016 8:19 am
- Location: Dewsbury, West Yorkshire
Re: FS: Maxxis Chronicles
Yup. Might not be a pair though Allen. Though I might be convinced (with some hard work and wise words)...
- Escape Goat
- Posts: 2606
- Joined: Thu Nov 01, 2018 10:41 pm
- Location: Not nearly close enough to Scotland...
Re: FS: Maxxis Chronicles
Haha, what condition? They my old ones?
My Movie Channel: https://tinyurl.com/YoutubeEG
My Instagram: https://www.instagram.com/allen.boardman
My Instagram: https://www.instagram.com/allen.boardman
-
- Posts: 9378
- Joined: Tue Sep 20, 2016 8:19 am
- Location: Dewsbury, West Yorkshire
Re: FS: Maxxis Chronicles
Nice condition. Will PM you some pics if you'd like...
- Escape Goat
- Posts: 2606
- Joined: Thu Nov 01, 2018 10:41 pm
- Location: Not nearly close enough to Scotland...
Re: FS: Maxxis Chronicles
Can't hurt mate. No rush.
My Movie Channel: https://tinyurl.com/YoutubeEG
My Instagram: https://www.instagram.com/allen.boardman
My Instagram: https://www.instagram.com/allen.boardman
-
- Posts: 9378
- Joined: Tue Sep 20, 2016 8:19 am
- Location: Dewsbury, West Yorkshire
Re: FS: Maxxis Chronicles
A few pics. Allen knows what they look like anyway (his old ones and hardly used since he sold on) but if anyone else is interested. The second one looks more or less the same but I'm having 'parting' issues
From what I can gather there'll be no thorns in there but I could recheck...
-
- Posts: 9378
- Joined: Tue Sep 20, 2016 8:19 am
- Location: Dewsbury, West Yorkshire
Re: FS: velocity 50mm rim on front hope hub
The Chronicle goung on the fleabay. If anyone would like the Velocity fat wheel in 29er flavour on a Hope hub with quick release then do say so. Priced to sell at £70 and once its gone on ebay (soon as I get chance) I'll probably have to remove from here...
Pics coming up. Postage should be about £12 ...
Pics coming up. Postage should be about £12 ...
-
- Posts: 623
- Joined: Thu Oct 15, 2015 10:13 am
Re: FS: velocity 50mm rim on front hope hub
Shaf hang fire on that wheel I’ll message you in the morning
Cheers
Cheers
-
- Posts: 9378
- Joined: Tue Sep 20, 2016 8:19 am
- Location: Dewsbury, West Yorkshire
Re: FS: velocity 50mm rim on front hope hub
Rim sold to the right honorable gentleman over the sea Thanks very much Gary and hope it works perfect for youMactheknife68 wrote: ↑Tue Feb 09, 2021 12:19 am Shaf hang fire on that wheel I’ll message you in the morning
Cheers
-
- Posts: 9378
- Joined: Tue Sep 20, 2016 8:19 am
- Location: Dewsbury, West Yorkshire
Re: FS: SLX shifter & XT rear mech (10 spd)
I suppose there should be a next up so might as well make it the 10 speed slx shifter and xt rear mech. Looks long cage and I gave it a good scrubbing. You might need to scrub a little more. One of the jockey wheels is smooth and the other would benefit from a regrease IMO. Also one of the wheels is about 50 percent worn but the other looks much less sharp.
£30 for the lot as the rear mech still hasn't had a fleabag bid (I've started it at £22 I think there)... pistage should be £4.10
£30 for the lot as the rear mech still hasn't had a fleabag bid (I've started it at £22 I think there)... pistage should be £4.10
- Cheeky Monkey
- Posts: 3915
- Joined: Mon Aug 01, 2011 1:48 pm
- Location: Leeds ish
- Contact:
Re: FS: SLX shifter & XT rear mech (10 spd)
Shaf - I'll have those please.
I'll PM some details.
I'd say drop them off or I'd pop round as we're same neckn f the woods but I'm isolating post-travel.
I'll PM some details.
I'd say drop them off or I'd pop round as we're same neckn f the woods but I'm isolating post-travel.
-
- Posts: 9378
- Joined: Tue Sep 20, 2016 8:19 am
- Location: Dewsbury, West Yorkshire
Re: FS: SLX shifter & XT rear mech (10 spd)
Sorted.
Front 3.0x29 Chronicle gone
Xt mech and slx shifter gone (thanks CM)
Pedals gone (thanks Dan)
Velocity wheel gone (ta Gary)
More stuff coming up... watch this space as this week it's all going cheap for some reason
Front 3.0x29 Chronicle gone
Xt mech and slx shifter gone (thanks CM)
Pedals gone (thanks Dan)
Velocity wheel gone (ta Gary)
More stuff coming up... watch this space as this week it's all going cheap for some reason
-
- Posts: 9378
- Joined: Tue Sep 20, 2016 8:19 am
- Location: Dewsbury, West Yorkshire
Re: FS: Basil portland front carrier
Surplus to my needs. It's a cut down Basil Portland front carrier. About £60 usually so £15 straight to feed the bear would be good please. £5 postage (so costing you £20 all in, unless you are close and want me to leave in a safe place).
Looks like this, this and this. Note where it's connected to the bottom bolts/hex of the fork. Seems as though you might need some spare washer or whatNot to make it work...
Looks like this, this and this. Note where it's connected to the bottom bolts/hex of the fork. Seems as though you might need some spare washer or whatNot to make it work...
- Specialist Hoprocker
- Posts: 322
- Joined: Sat Sep 30, 2017 9:31 am
- Location: Deepest Darkest Surrey
Re: FS: Basil portland front carrier
Washers are in the plastic bag tied to the rack. I only placed it on for the photo but it's been fully tested in the field (and woods).
It's a bona fide Hoprocker Creation™. I very nearly hung on to it, but it just wouldn't look right on the new bike and it really suited the Ramin.
It's a bona fide Hoprocker Creation™. I very nearly hung on to it, but it just wouldn't look right on the new bike and it really suited the Ramin.
-
- Posts: 9378
- Joined: Tue Sep 20, 2016 8:19 am
- Location: Dewsbury, West Yorkshire
Re: FS: Basil portland front carrier
There we have it, from the man himself. I thought as much that the washers would be in there Alex but forgot to check/update. I have put it up for a reasonable price right?? Or would you suggest higher. I'm gonna get a Surly as I reckon Butcher deserts a 24 pack...Specialist Hoprocker wrote: ↑Fri Feb 12, 2021 2:03 pm Washers are in the plastic bag tied to the rack. I only placed it on for the photo but it's been fully tested in the field (and woods).
It's a bona fide Hoprocker Creation™. I very nearly hung on to it, but it just wouldn't look right on the new bike and it really suited the Ramin.
Re: FS: Basil portland front carrier
I'll take the front carrier Shaf. I reckon it might fit on the front of my Big Dummy. Please can you PM me your paypal details?
@ Specialist Hoprocker - out of interest, did you cut it down yourself and then powder coat it?
@ Specialist Hoprocker - out of interest, did you cut it down yourself and then powder coat it?
-
- Posts: 9378
- Joined: Tue Sep 20, 2016 8:19 am
- Location: Dewsbury, West Yorkshire
Re: FS: Basil portland front carrier
No worries and thanks Ben... Didn't you send me summat for gratis once or twice (I lost count) if so then it's yours, no charge. I shall feed the bear later at some point... Paypal details coming through for postage duties
-
- Posts: 9378
- Joined: Tue Sep 20, 2016 8:19 am
- Location: Dewsbury, West Yorkshire
Re: FS: Basil portland front carrier
Front rack gone to a lovely home
- Specialist Hoprocker
- Posts: 322
- Joined: Sat Sep 30, 2017 9:31 am
- Location: Deepest Darkest Surrey
Re: FS: Basil portland front carrier
Cut it with a Dremel, smoothed the cuts off. Keyed the racked and sprayed it mat black.
Doesn't seem to chip off, bit you may need some touch-up on standby if you're worried.
Doesn't seem to chip off, bit you may need some touch-up on standby if you're worried.