Wtd: road/CX Shimano hollowtech cranks or R side only

[redefined_cycles]

Preferably black. Lower teeth rings are better. 172.5mm if its only thw drive side you have available. Nothing less than 105 or equivalent please (sorry).

Cheaper is better please and teeth need to be goo useable. 10 speed or 11 is fine...

Thanks

[Escape Goat]

How many holes shaf...

[redefined_cycles]

How many holes shaf...

Ta Al... Was hoping I'd find summat with the chainrings (maybe the title should be edited). What you got and I'll take a look at how much rings is gonna cost me... Please, ta... how much aswell (for what you have). As a general rule, newer is better in which case (I think) 4 holes

[Escape Goat]

sorry mate, thought I had a spare set of Ultegras :(

[redefined_cycles]

sorry mate, thought I had a spare set of Ultegras :(

No worries. Ultegras would have been amazing and much higher than what I was expecting

[PaulE]

I've some 175mm cx50 cranks with 36-46 rings if they're any interest? I think they're 105 level?

[redefined_cycles]

I've some 175mm cx50 cranks with 36-46 rings if they're any interest? I think they're 105 level?

So sad... as 175 is probably a bit tall for me. 172.5 is max

[samwise]

Will PM you shortly!

[redefined_cycles]

Will PM you shortly!

Thanks Sam. Have replied. 1x no good for me unfortunately...

Still looking

[Asposium]

i have a crank set, ultegra, 172.5mm
but the rings are worn and will need replacing
ring bolts are present
you can have for the cost of postage

[redefined_cycles]

i have a crank set, ultegra, 172.5mm
but the rings are worn and will need replacing
ring bolts are present
you can have for the cost of postage

Yes please kind sir. PM incoming

[redefined_cycles]

i have a crank set, ultegra, 172.5mm
but the rings are worn and will need replacing
ring bolts are present
you can have for the cost of postage

Just been looking at rings. Pribably not gonna be cost effective for me so won't need it. Thanks though.