One on BBB large frameset, force 1 cranks, 650b gravel dynamo wheelset

Buy, sell, swap.

Moderators: Bearbonesnorm, Taylor, Chew

Post Reply
BenS
Posts: 107
Joined: Wed Nov 06, 2013 3:31 pm
Location: Sheffield

One on BBB large frameset, force 1 cranks, 650b gravel dynamo wheelset

Post by BenS »

I've treated my wrists to something drop barred with a bouncy fork, and robbed the groupset that fitted from my gravel bike. I have for sale (in Cardiff if you want to collect):

On one Bish bash bosh gravel frameset in large, including hope seatpost clamp, selcof carbon seatpost, spare mech hanger and 100mm selcof stem. Pictures show a bottom bracket but this will come off, see below. The frame was taped and still is in places, I had a sharp piece of tape that has rubbed on the fork and gone down to the carbon just where fork meets headset. I do not think it's more than just through the paint but want to highlight it. Frame is registered with data tag and paperwork included to register frame to you (I think there is a £10 fee). Cable routing has been modified to allow continuous outer for the gear cable and I’ll make sure there are guides for rethreading the brake cable in place. Pictures here https://photos.app.goo.gl/Mb2Jnsy9dSkxfvjX9
Asking £150 plus whatever postage is - cheapest I can see is £30 but I'm open to suggestions

Crankset, SRAM force 1 1x crankset, with sram 42t wide narrow chainring with about 40 miles on it. It did have a smaller oval chainring fitted but that has worn badly. They are 172.5mm. It has some uv marking on backside of crank for the data tag associated with frame above. £80 posted
https://photos.app.goo.gl/bkm9YzH72Gv7iB126

I have a black hope bottom bracket with the insert pressed in for the above crankset, 68/73 threaded. £50 posted


Wheelset

SP Dynamo 15x100mm laced with sapim d-light spokes and brass nipples onto pacenti CL25 rim. 47c gravel king SK tyre with plenty of life in it. Rear is a Chinese Novatec hub 142x12mm with an XD driver, d-light / sapim 1.8/2.0 spokes NDS/DS with brass nipples onto pacenti CL25 rim and a 42c Clement XPLOR MSO tyre, again with lots of life left. Both tyres are set up tubeless. I will be keeping the rotor in the picture but including the SRAM XD 10-42 (it’s the cheapest on they do) if wanted. Wheels would be given a clean before posting! £180 posted.

https://photos.app.goo.gl/PXRa1wdmnuToq2mJ8

I’m open to offers if you think I have any of the pricing wrong
Post Reply