Wanted - 9mm qr end caps for hope hubs

Retiredtester · Post by **Retiredtester** » Thu May 30, 2019 9:52 pm

I'm after a set of qr end caps for a hope pro 4 front hub and a pro 2 evo rear. Thanks in advance!

PaulE · Post by **PaulE** » Thu May 30, 2019 10:32 pm

Do you know if they are the same for all Pro hubs? I've a front set in the toolbox but I think they are pro2

Lazarus · Post by **Lazarus** » Thu May 30, 2019 11:17 pm

pro 2 and PRo 2 evo are the same no idea on 4 not that posh

I also have a set for the 2 - you can have them

Dyffers · Post by **Dyffers** » Thu May 30, 2019 11:24 pm

Pro 2 Evo and Pro 4 front are certainly the same adaptors. Not sure about the rear.

(No spares, sorry)

Retiredtester · Post by **Retiredtester** » Fri May 31, 2019 9:15 am

Thanks very much for all the replies. Lazarus, do you have caps for front or rear?

Ps not that posh - just reclaiming the hubs from a knackered wheel set a bloke at work gave me a great deal on!

redefined_cycles · Post by **redefined_cycles** » Fri May 31, 2019 9:40 am

I also have some Hope ends caps but its the thru axle option I think... lemme know if any good and can post em on...

Shaiq

Retiredtester · Post by **Retiredtester** » Fri May 31, 2019 9:52 am

Thanks shaiq. They've got 15 or 20mm thru axle end caps at the mo. Are yours 12mm by any chance? I've got a dt swiss 12mm qr skewer that would work with them...

Lazarus · Post by **Lazarus** » Fri May 31, 2019 10:01 am

I have two sets but both are front
https://www.chainreactioncycles.com/hop ... -prod10238
Google pics seems to say the front and the rear are different [ which is news to me so looks like i cannot help [ sorry I did not realise they were different]

Retiredtester · Post by **Retiredtester** » Fri May 31, 2019 10:38 am

Thanks shaiq. They've got 15 or 20mm thru axle end caps at the mo. Are yours 12mm by any chance? I've got a dt swiss 12mm qr skewer that would work with them...

redefined_cycles · Post by **redefined_cycles** » Fri May 31, 2019 10:41 am

Retiredtester wrote: ↑Fri May 31, 2019 9:52 am Thanks shaiq. They've got 15 or 20mm thru axle end caps at the mo. Are yours 12mm by any chance? I've got a dt swiss 12mm qr skewer that would work with them...

Nope... sorry fella. Mine is 20mm aswell (and another which is standard 9mm QR but pretty sure they for some dt swiss hubs of some sort...

Shafiq (sorry I wrote Shaiq... which literally (apparently) just means (in the desert) "wise old man" (hence technically speaking... and if we were in the Arabian desert, it'd be Stu thats the Shaiq and I'd remain Shafiq)

Lazarus · Post by **Lazarus** » Fri May 31, 2019 10:53 am

would it not be cheaper to just insert a QR adapter into what you have
Only a few quid from china on ebay
I use one to adapt between 15 and QR as its easier than changing end caps - marginal weight penalty mind.
Think i have this one FRONT LENGTH DONT BUY
https://www.ebay.co.uk/itm/MTB-Bicycle- ... 3356523878

Retiredtester · Post by **Retiredtester** » Fri May 31, 2019 12:38 pm

Thanks and no worries shafiq! Yes, good point lazarus, but I'm also after rear wheel caps - it's currently 142mm and I need 135.

benconnolli · Post by **benconnolli** » Fri May 31, 2019 7:23 pm

I have a wheel with qr and frame with 142 15mm. Do you still need your end caps or want to do a switcheroo?

Fork and wheel are qr so can only help with one end.

Retiredtester · Post by **Retiredtester** » Fri May 31, 2019 7:51 pm

Switcheroo would be great! Hope 2 evo?

benconnolli · Post by **benconnolli** » Fri May 31, 2019 10:42 pm

Retiredtester wrote: ↑Fri May 31, 2019 7:51 pm Switcheroo would be great! Hope 2 evo?

The very same.

PMed you

Retiredtester · Post by **Retiredtester** » Sat Jun 01, 2019 4:03 pm

Lazarus wrote: ↑Fri May 31, 2019 10:01 am I have two sets but both are front
https://www.chainreactioncycles.com/hop ... -prod10238
Google pics seems to say the front and the rear are different [ which is news to me so looks like i cannot help [ sorry I did not realise they were different]

Lazarus, if you're up for selling a pair of the front caps, I'll take a chance on them fitting. I'll drop you a line.

Wanted - 9mm qr end caps for hope hubs

Wanted - 9mm qr end caps for hope hubs

Re: Wanted - 9mm qr end caps for hope hubs

Re: Wanted - 9mm qr end caps for hope hubs

Re: Wanted - 9mm qr end caps for hope hubs

Re: Wanted - 9mm qr end caps for hope hubs

Re: Wanted - 9mm qr end caps for hope hubs

Re: Wanted - 9mm qr end caps for hope hubs

Re: Wanted - 9mm qr end caps for hope hubs

Re: Wanted - 9mm qr end caps for hope hubs

Re: Wanted - 9mm qr end caps for hope hubs

Re: Wanted - 9mm qr end caps for hope hubs

Re: Wanted - 9mm qr end caps for hope hubs

Re: Wanted - 9mm qr end caps for hope hubs

Re: Wanted - 9mm qr end caps for hope hubs

Re: Wanted - 9mm qr end caps for hope hubs

Re: Wanted - 9mm qr end caps for hope hubs