FOC: XT front mech M770
Moderators: Bearbonesnorm, Taylor, Chew
-
- Posts: 9371
- Joined: Tue Sep 20, 2016 8:19 am
- Location: Dewsbury, West Yorkshire
FOC: XT front mech M770
Bit mud stained... 34.9 clamp but can be shimmed (might have some for you but not sure). Please take it off me...
- Brothersmith
- Posts: 560
- Joined: Sat Aug 06, 2011 5:36 pm
- Location: South of the Peak
Re: FOC: XT front mech M770
Hi,
I my take that. Can you Confirm 770’s 10spd isn’t it? Also is it bottom pull?
Cheers
Malc
I my take that. Can you Confirm 770’s 10spd isn’t it? Also is it bottom pull?
Cheers
Malc
-
- Posts: 9371
- Joined: Tue Sep 20, 2016 8:19 am
- Location: Dewsbury, West Yorkshire
Re: FOC: XT front mech M770
Happy to confirm that its a dual pull..
Not so happy to confirm that its (most likely) a 9 speed (if memory serves me correctly as I seem to remember building it with a 9 speed rear SLX Shadow)...
It was running with a triple up front chainset so not sure if these can be run with a double!!
Not so happy to confirm that its (most likely) a 9 speed (if memory serves me correctly as I seem to remember building it with a 9 speed rear SLX Shadow)...
It was running with a triple up front chainset so not sure if these can be run with a double!!
- Brothersmith
- Posts: 560
- Joined: Sat Aug 06, 2011 5:36 pm
- Location: South of the Peak
Re: FOC: XT front mech M770
Double, triple doesn't matter too much as just set the limit screws and the shifter will determine the rings.
9 spd not so good though as wont work with my 10spdn rings.
Thanks anyway
Malc
9 spd not so good though as wont work with my 10spdn rings.
Thanks anyway
Malc