BB30 adapters - Wheels manufacturing

[biggaygibbon]

Have two sets of these for sale - had them on old Cannondale MTBs and no longer needed as flogged the bikes with original cranks

http://www.wiggle.co.uk/wheels-manufact ... dle-shims/

Offers

[Bearbonesnorm]

Might be interested in a pair. Just need to dredge the back of my mind and see if I can remember whether I need BB30 or PF ... if the memory fails me, I'll resort to measuring

[kazafaza]

I’ve used the same adapters on my old Spearfish with PFbb30 - you just pop those into the bearings on your frame and fit HollowTech cranks. Doesn’t really matter if the frame is BB30 or PFbb30..?

[biggaygibbon]

Yup even I could fit them.

[Teetosugars]

Would these fit a road bike? Only my winter road bike has a BB30,and I want to change it over..

[Zippy]

Would these fit a road bike?

Yes, but if you put some gravel tyres on it and call it an adventure bike it will suddenly stop working

[Pete-G]

The bearings themselves are same size in bb30 and pf30. 6806 if I recall correctly. The adaptors should work in both absolutely fine. Just a case of getting the spacing right so as to not overload the bearings.

[Bearbonesnorm]

Sorry for the confusion, I hadn't realised these were sleeves to reduce the I/D of PF bearings rather than a way of doing away with them.

[biggaygibbon]

They fit road or MTB - they are simply an adapter to convert from BB30 to Shimano. - you just use the Shimano spacers you already use to
Easy to fit as here:

http://wheelsmfg.com/bottom-brackets/bb ... a-etc.html