22.2mm GoPro bracket?

[techno]

I'm looking for a GoPro mount with a 22.2mm DIA clamp.
Anyone know where I might get one? I'm struggling to find what I'm looking for.
Ta.

[BigdummySteve]

https://www.cotswoldoutdoor.com/p/gopro ... HhEALw_wcB

Failing that I’ve a garmin/GoPro stem mount going spare.

Another option is a standard 10mm to GoPro adapter which opens up a lot of options to use various light mounts.

[JohnClimber]

Would the bottom left one in the photo on this ebay link do the job for you?

https://www.ebay.co.uk/p/25028920922?iid=274691590737

[sean_iow]

I use an Exposure light mount with shims from eBay and then an Exposure cleat to GoPro adapter.

This is for the front of my Jones Loops.

[techno]

Thanks for the options fellas,
My ideal if what I'm looking for is a minimal setup. Neat, no shims no protruding bolts. Basically this:

Minus the shim.

Moon on a stick I know. But, if I aim for that. I might end up with a lump of cheese on a stick and not a bag of scrap on a stick

[BigdummySteve]

Klickfix do a GoPro mount, pretty minimal when the camera is removed.
https://www.merlincycles.com/klickfix-c ... source=PHG

[BigdummySteve]

https://www.shapeways.com/product/YJG4A ... -for-gopro

[sean_iow]

Mine is just the mount for my light with an adapter to take the camera really, so the only but I had to buy was the little plastic adapter to mount the Gopro on the Exposure mount.



Normally the light would be there.

[techno]

https://www.shapeways.com/product/YJG4A ... -for-gopro

Not bad Steve, found this on shapeways which is perfect:
https://www.shapeways.com/product/5E6Q3 ... =114484430
Thanks.

[techno]

Mine is just the mount for my light with an adapter to take the camera really, so the only but I had to buy was the little plastic adapter to mount the Gopro on the Exposure mount.



Normally the light would be there.

Nice Sean, I'll have a look at the exposure mounts. Thanks.

[sean_iow]

I used the Exposure mount as it was already on the bars. I like that Shapeway bracket, I might be able to mount my camera upside down beneath the light with that so I could film at night. Obviously at the moment as the camera is on the light mount it's one or the other.

[techno]

I used the Exposure mount as it was already on the bars. I like that Shapeway bracket, I might be able to mount my camera upside down beneath the light with that so I could film at night. Obviously at the moment as the camera is on the light mount it's one or the other.

Did you need an extra shim with the exposure bracket?
The ones I've seen are 31.8-25.4 or 35-31.8

[sean_iow]

I got some shims from eBay that go from the 31.8 down to the 22 for the loop. There just like the Exposure ones but with a smaller middle diameter.

Edit, like these

https://www.ebay.co.uk/itm/10Pcs-Bike-H ... %3A2334524

I cant remember the width I needed for the exposure mount.

[techno]

I got some shims from eBay that go from the 31.8 down to the 22 for the loop. There just like the Exposure ones but with a smaller middle diameter.

Edit, like these

https://www.ebay.co.uk/itm/10Pcs-Bike-H ... %3A2334524

I cant remember the width I needed for the exposure mount.

Fantastic, thanks Shawn.

[techno]

Found a local manufacturer that makes the bracket I need!
https://www.r3pro.co.uk/collections/bik ... -bar-clamp