help needed please

[windjammer]

whilst working on a customers house repairing chipboard flooring i some how got glue on a piece of there carpet which so happens to be the most expensive piece in the house,the glue i was using Soudal PU Construct | Rapid Set D4 Waterproof Timber Frame Wood Glue Adhesive.
anyone have any tips on how to remove the dried glue its the size of a pound coin,what would happen if i placed a clean rag over the glue and used a steam iron to try and melt the glue
thanks

[ericrobo]

I would phone the supplier or manufacturer....

Any other ideas might make it worse....

????

[trob6]

I am a wood worker and use pu glue a lot, its totally waterproof so steam wont do it , cellulose thinners might soften it a little but it's very strong stuff, good luck.

[windjammer]

thanks for the replies,i used some nail varnish remover on the glue tonight at home and it dissolved the glue so that should work i hope

[Lazarus]

does it damage carpet though ? make the dye run melt it ?

I have no idea but i would want to test that and use as little as possible on the glue/carpet.

[windjammer]

the dye never ran but the carpet delaminated a bit on the woven cloth backing