Rear QR Skewer

PaulB2 · Post by **PaulB2** » Mon Jan 28, 2019 3:21 pm

Since I managed to bend my rear skewer like it was made of cheese while fitting my kid trailer to my Arkose, does anyone have any recommendations for a steel skewer before I spring for a Hope one? The steel one I have is for a 130mm hub not a 135.

Bearbonesnorm · Post by **Bearbonesnorm** » Mon Jan 28, 2019 3:31 pm

Cheap and cheerful Shimano tend to be very tough.

techno · Post by **techno** » Mon Jan 28, 2019 3:34 pm

Agreed, never had a problem with them in 25 years cycling: https://www.sjscycles.co.uk/hub-spares/ ... ack-135mm/

Chew · Post by **Chew** » Mon Jan 28, 2019 3:41 pm

Go Shimano

The Hope ones are made of cheese, and the cam will wear out making them useless fairly quickly

PaulB2 · Post by **PaulB2** » Mon Jan 28, 2019 3:53 pm

Ta muchly

benp1 · Post by **benp1** » Mon Jan 28, 2019 4:32 pm

I have a Allen keyed one on my Solaris that pulled my trailer great

Mind you, my QR one on my Arkose also pulled my trailer fine

Then sold the trailer, now have another child on the way, need to get another trailer...!

Mart · Post by **Mart** » Mon Jan 28, 2019 4:44 pm

I had problems with the Hope QR cam being scored and losing its grip - Changed to Shimano and never had a problem

PaulB2 · Post by **PaulB2** » Mon Jan 28, 2019 5:20 pm

benp1 wrote:I have a Allen keyed one on my Solaris that pulled my trailer great

Mind you, my QR one on my Arkose also pulled my trailer fine

Then sold the trailer, now have another child on the way, need to get another trailer...!

I think it was mostly user error - I don't think I tightened it up quite enough and then while I was fetching the child out of the house a big gust of wind blew the bike and the bin it had been leaning against over resulting in scratches down one side of the bike, a bent skewer and the wheel pulled out of the drop outs.

benp1 · Post by **benp1** » Mon Jan 28, 2019 5:40 pm

Ooops. I was going up a little slope, short and sharp section that had a rock in the wrong place. I stood up to pedal over it and there was a pretty unpleasant noise

Wheel had pulled out the drop out. But thankfully haven't released the trailer! Managed to fix it before getting a telling off for being irresponsible!

lune ranger · Post by **lune ranger** » Mon Jan 28, 2019 7:04 pm

I've never had a problem with Hope's. I've had one set at least 15years on a regularly used bike. Just got a set SH to use on the Fargo build which are a different design. Wonder if it's new Hope's that are cheesy?

BigdummySteve · Post by **BigdummySteve** » Mon Jan 28, 2019 8:09 pm

Shimano xt, tried a few in the rohloff/ecr. Both DT Swiss and hope failed to do the job, XT just worked and never moved

Mariner · Post by **Mariner** » Tue Jan 29, 2019 11:19 am

XT just worked and never moved

Even when fitted in a loose alternator plate.

Justchris · Post by **Justchris** » Thu Jan 31, 2019 8:30 pm

The rear skewer from a turbo trainer is designed to bear weight on it. Very sturdy.

C

Rear QR Skewer

Rear QR Skewer

Re: Rear QR Skewer

Re: Rear QR Skewer

Re: Rear QR Skewer

Re: Rear QR Skewer

Re: Rear QR Skewer

Re: Rear QR Skewer

Re: Rear QR Skewer

Re: Rear QR Skewer

Re: Rear QR Skewer

Re: Rear QR Skewer

Re: Rear QR Skewer

Re: Rear QR Skewer