Exposure light mount on Jones bars
Moderators: Bearbonesnorm, Taylor, Chew
Exposure light mount on Jones bars
Someone must have mounted an Exposure light mount to the front bit of a jones loop bar.
What did you shim it with?
Homemade but still solid options would be good.
What did you shim it with?
Homemade but still solid options would be good.
Re: Exposure light mount on Jones bars
Piece of inner tube wrapped round 3 times makes a great shim.
Re: Exposure light mount on Jones bars
Alternative is, exposure do a mount that attaches with zip ties
Re: Exposure light mount on Jones bars
I don't think my Exposure mount even has inner tube on it,I think it's just the Exposure red bit of silicone on mine?
Bit if it didn't fit, then I would have used inner tube
Bit if it didn't fit, then I would have used inner tube
-
- Posts: 8144
- Joined: Mon Mar 18, 2013 9:56 am
-
- Posts: 1267
- Joined: Wed Apr 03, 2013 8:46 pm
- Location: Edinburgh
- Contact:
Re: Exposure light mount on Jones bars
It depends on the light. My Revo was shimmed with some gorilla tape when I lost the wee bit of plastic, but my Diablo uses the silicon mount which is great until you need the light to point in any direction other than perpendicular to the handlebar
- Bearbonesnorm
- Posts: 23940
- Joined: Sun Jun 05, 2011 8:53 pm
- Location: my own little world
Re: Exposure light mount on Jones bars
Do you see much with that Colin?
May the bridges you burn light your way
Re: Exposure light mount on Jones bars
Scrotes - You can get pills for that if it's a recurring problem. Don't be ashamed. Apparently it's quite common.
OP - black electrical tape. Don't over think, tape is your friend.
OP - black electrical tape. Don't over think, tape is your friend.
-
- Posts: 696
- Joined: Wed Apr 10, 2013 4:53 pm
- Location: Cheshire
Re: Exposure light mount on Jones bars
A combination of a bit of Inner Tube, and a few wraps of Black Nasty seem to do the trick.
-
- Posts: 8144
- Joined: Mon Mar 18, 2013 9:56 am
Re: Exposure light mount on Jones bars
Ah - perhaps I should have pointed out that the bike is currently hanging from its rear wheel.
Re: Exposure light mount on Jones bars
i've used black tape, inner tubes and one of these - https://www.singletrackbikes.co.uk/m7b3 ... g_Bar_Shim all work. although the 2.50 for the shim is my favourite option.
Re: Exposure light mount on Jones bars
just a few wraps of electrical tape does the job
2924 miles per Gallon
Re: Exposure light mount on Jones bars
Thanks all. Time to get creative.