Page 1 of 1

3D Printing

Posted: Sun Aug 29, 2021 7:18 am
by Teaman
Whilst searching the net for bike packing stuff I came across this 3D printing site with lots of files for various items some of which look very useful. I haven't got a 3D printer but f I knew the product would be fairly good I would consider trying 1 or 2 items if I could find someone with a suitable 3D printer.
2 Q's:

1) Anybody any experience or knowledge of using a site like this one? The items look good but no telling for me if the print file will produce anything resembling the pictured item.
2) Anybody here with a 3D printer or access to one who would be willing to try it out for me? I would be willing to pay.

Here's the site:

https://www.yeggi.com/q/bikepacking/

A quick Google shows yeggi is perhaps the biggest of any site for indexed 3D item files with about 89% of them free.

Re: 3D Printing

Posted: Sun Aug 29, 2021 8:09 am
by Dave Barter
The site links to thingyverse which is the go to site for 3D printing. You download a file from there into a software package which formats it for your printer. There is some faff in getting your printer setup and finding the right settings that work for you. It is definitely not plug and play but once you’re setup it’s relatively easy to do prints.

Pick something smallish from the site and I’ll print you an item from there

Re: 3D Printing

Posted: Sun Aug 29, 2021 11:41 am
by Teaman
Many thanks Dave. I'll have a browse and send you a DM. Might not be until tomorrow as we're out most of today.

Re: 3D Printing

Posted: Sat Sep 04, 2021 4:01 pm
by BobCatMax
If you need a hand with any of the models or anything creating, shout my way. i'm a 3D modeller by trade.

Re: 3D Printing

Posted: Sun Oct 24, 2021 2:34 pm
by Richpips
So, I've found something that I'd like to print, a bar harness ( https://www.thingiverse.com/thing:4530259 )

I've not got a printer so I dropped the files into a couple of "online printers" and the bill is looking like just north of £100.

Is that price about right?

Should I buy a printer and make the parts myself?

Which hobby printer?

Re: 3D Printing

Posted: Sun Oct 24, 2021 10:23 pm
by Teaman
Richpips wrote: Sun Oct 24, 2021 2:34 pm So, I've found something that I'd like to print, a bar harness ( https://www.thingiverse.com/thing:4530259 )

I've not got a printer so I dropped the files into a couple of "online printers" and the bill is looking like just north of £100.

Is that price about right?

I don't have any experience ref 3D printing but £100 seems a lot to spend on something which although looks good might not turn out to be that good if you get my drift 🤔. If you could see reviews of the design and how it works in real life, I guess it would be less risky to splash the cash. However, if it turns out to not be ideal, i would be rather pis##d off at that sort of price.
I thought the attraction of 3D printing was that you could get stuff a fair bit cheaper than branded products etc.
However, I'm after something similar to what you want, so please update here as to how you get in and whether it's any good 👍

Re: 3D Printing

Posted: Mon Oct 25, 2021 12:28 am
by ledburner
I have no experience, but why chance tat money on an unknown out come.
Have a look at DrJon Bagworks products Eg strap deck and G-clamps. He has a good reputation.
https://wildcat.cc/products/dewidget-strap-deck-large stock them
review https://bikepacking.com/gear/drj0n-bagw ... em-review/

Re: 3D Printing

Posted: Fri Nov 12, 2021 11:15 pm
by Ian
Has anyone made one of these, or anything similar?
https://www.thingiverse.com/thing:3979724

It is an adapter fir mounting a Garmin Etrex to the Garmin quarter turn interface.

Thanks

Re: 3D Printing

Posted: Sat Nov 13, 2021 12:51 am
by ledburner
Ian wrote: Fri Nov 12, 2021 11:15 pm Has anyone made one of these, or anything similar?
https://www.thingiverse.com/thing:3979724

It is an adapter fir mounting a Garmin Etrex to the Garmin quarter turn interface.

Thanks
No, but my experience with genuine extrex mounts (thanks Escape _Goat) :-bd and copies (Thanks for nowt Ebay] :sad: is the copies have a 'undocumented' self eject feature :o . there is little observable difference between them, but on the proper item the locking clip is more positive and engages. :smile:, the clone doesn't click on. :sad:

It might be worth considering making a MYOG mount. getting the Garmin K-edge disc- fixed onto a proper Extrex mount . :-bd
just my tw'penn'th :wink:

Re: 3D Printing

Posted: Sat Nov 13, 2021 1:20 am
by ScotRoutes
Ian wrote: Fri Nov 12, 2021 11:15 pm Has anyone made one of these, or anything similar?
https://www.thingiverse.com/thing:3979724

It is an adapter fir mounting a Garmin Etrex to the Garmin quarter turn interface.

Thanks
Sweary Dave made one for me. I've only used it a couple of times (for my Oregon 700) and it's been fine.

Re: 3D Printing

Posted: Sat Nov 13, 2021 11:13 am
by ledburner
ScotRoutes wrote: Sat Nov 13, 2021 1:20 am
Ian wrote: Fri Nov 12, 2021 11:15 pm Has anyone made one of these, or anything similar?
https://www.thingiverse.com/thing:3979724

It is an adapter fir mounting a Garmin Etrex to the Garmin quarter turn interface.

Thanks
Sweary Dave made one for me. I've only used it a couple of times (for my Oregon 700) and it's been fine.
Ian that's great, there's your answer!

Re: 3D Printing

Posted: Sat Nov 13, 2021 11:17 am
by ScotRoutes
I was actually thinking that the reverse adapter would be handy too - Edge 1/4 turn onto Etrex/Oregon mount.

Re: 3D Printing

Posted: Sat Nov 13, 2021 11:19 am
by ledburner
ScotRoutes wrote: Sat Nov 13, 2021 11:17 am I was actually thinking that the reverse adapter would be handy too - Edge 1/4 turn onto Etrex/Oregon mount.
That would be bulky. Get a scrap Extrex GPS and take it from the with the case?

Re: 3D Printing

Posted: Sat Nov 13, 2021 12:09 pm
by Ian
Thanks, I’ll drop Dave a message.

The neatest way to do it would be to print a new battery cover with the quarter turn interface built onto the bottom. However, drawing such a thing in 3D is totally beyond me.

Re: 3D Printing

Posted: Sat Nov 13, 2021 12:52 pm
by whitestone
Ian wrote: Sat Nov 13, 2021 12:09 pm Thanks, I’ll drop Dave a message.

The neatest way to do it would be to print a new battery cover with the quarter turn interface built onto the bottom. However, drawing such a thing in 3D is totally beyond me.
Always puzzled me why Garmin themselves don't offer such an option. The only possible thing to watch out for is that the centre of gravity of the Etrex and Oregon models isn't halfway along the body, you'd need to adjust where you had the quarter turn part to align with the CofG.

Re: 3D Printing

Posted: Sat Nov 13, 2021 1:56 pm
by BobCatMax
Ian wrote: Sat Nov 13, 2021 12:09 pm Thanks, I’ll drop Dave a message.

The neatest way to do it would be to print a new battery cover with the quarter turn interface built onto the bottom. However, drawing such a thing in 3D is totally beyond me.
Send me/post pictures of what you're talking about, Ian

Re: 3D Printing

Posted: Sat Nov 13, 2021 2:53 pm
by Ian
BobCatMax wrote: Sat Nov 13, 2021 1:56 pmSend me/post pictures of what you're talking about, Ian
Basically one of these with the male quarter turn interface integrated to it. There’s a design on Shapeways here for one that screws on to the stock battery cover, which is an option I suppose, but integrated seems more reliable.

As Bob says, some thought required on how far along the length of the unit to have the mount point.

Re: 3D Printing

Posted: Sun Nov 14, 2021 8:44 am
by atk
Jon's had something similar made https://www.instagram.com/p/CMXKb_5H7i6 ... oeERVYOM0/

Adapter, not integrated in the battery cover

Re: 3D Printing

Posted: Sun Nov 14, 2021 12:13 pm
by ledburner
atk wrote: Sun Nov 14, 2021 8:44 am Jon's had something similar made https://www.instagram.com/p/CMXKb_5H7i6 ... oeERVYOM0/

Adapter, not integrated in the battery cover
is this the same story... some of it is relevant but its from 2014
Dr Jon garm Etrex to extended GPS mount

Re: 3D Printing

Posted: Sun Nov 14, 2021 3:11 pm
by Ian
Similar story, yes. I’d say that was the embryonic thinking that lead to the MC Deck setup. Four years later, the MC Deck has many fans but options for Etrex mounts haven’t advanced to any great extent.

Re: 3D Printing

Posted: Thu Nov 25, 2021 2:10 pm
by BobCatMax
is it something like this?

https://www.thingiverse.com/thing:3979724

not mine, just a bit of sleuthing..

Re: 3D Printing

Posted: Fri Nov 26, 2021 6:50 pm
by Ian
That’s the one I linked further up on 12 November, and Dave kindly printed for me.

Re: 3D Printing

Posted: Sat Nov 27, 2021 6:15 am
by BobCatMax
Ha!

Apologies Ian. Apparently I can't see for looking..