Page 1 of 1

Bendable plastic for making a harness

Posted: Mon Nov 04, 2019 8:53 pm
by freddy_tanner
Hi guys

So I recently (ie today, a few minutes ago) came across this https://bikepacking.com/gear/wayward-ri ... ss-review/

Its a really great, simple design. So I went to look to purchase one. Problem number 1 - made and sold in New Zealand, had a look around and could find any UK distributors. Problem number 2 - out of stock. Problem number 3 - its very expensive!

So I started to tinker around with an idea to make something similar. In the end all I would need is bendable plastic and a few webbing straps.

Does anyone know of a decent bendable plastic for such a thing?

Thanks! (And sorry to anyone from Wayward who may be reading this thinking Im a jerk for wanting to make a copy for myself!)

Re: Bendable plastic for making a harness

Posted: Mon Nov 04, 2019 9:48 pm
by javatime
I have made a handlebar harness using plastic sheet that was previously an A4 plastic ring binder from the pound shop. When you remove the clip mechanism you end up with a piece A3 size.
Hope that helps.

Re: Bendable plastic for making a harness

Posted: Mon Nov 04, 2019 10:09 pm
by freddy_tanner
Cheers Javatime,

How did you find that harness in terms of rigidness and wear and tear? I was thinking about trying that but was a little worried that it would bend far too much and then wear through pretty quickly.

Re: Bendable plastic for making a harness

Posted: Mon Nov 04, 2019 10:38 pm
by ripio
Maybe one of those large floppy plastic buckets would be a suitable source to cut the pattern out of?
e.g. https://www.wickes.co.uk/Wickes-Soft-Bl ... L/p/160179

Re: Bendable plastic for making a harness

Posted: Mon Nov 04, 2019 10:40 pm
by Bearbonesnorm
Just about any thin plastic would do the job. Any craft shops nearby, they're usually a good source?

Re: Bendable plastic for making a harness

Posted: Mon Nov 04, 2019 10:42 pm
by RIP
freddy_tanner wrote: Mon Nov 04, 2019 8:53 pm So I recently (ie today, a few minutes ago) came across this https://bikepacking.com/gear/wayward-ri ... ss-review/
Enjoyed reading that Fred, thanks. Nice minimal design that is. Like it. But $50 - hmm.

Funnily enough I've got some plastic card arriving tomorrow. A4 sheets, 3mm thick. eg https://www.ebay.co.uk/itm/163153035389. Going to make a rear mudguard extender. Today I first tried making one from a 2L plastic milk bottle - works, but smells a bit funny :wink: .

Gaffer tape! No, hear me out :wink: . Long sufferers on Here will know about my gaffer tape stem cell for a 500ml water bottle - weighs about 15g. Fancy impressing us with a duct tape seat harness?!

Re: Bendable plastic for making a harness

Posted: Tue Nov 05, 2019 12:41 pm
by freddy_tanner
Wow, love the ingenuity on the big bucket and the duct tape plan! That's some proper Macgyver stuff.

Going to hit up one of the local craft shops to see what they have in store before I try either of those out though.

Cheers!

Re: Bendable plastic for making a harness

Posted: Tue Nov 05, 2019 1:20 pm
by javatime
Later reply :

The harness is very good - Stu posted the link a few years back, something like "No sew handlebar harness". I will try to post some pics. this evening. Reg has it right, although the pound shop folder cover works, I thought that something a bit more "polythene" would be more robust. Something cut from a 5 gallon distilled water drum would be ideal (missed one outside a shop recently)

Re: Bendable plastic for making a harness

Posted: Tue Nov 05, 2019 3:10 pm
by belugabob
Get down your local B&M - pack of 4 plastic cutting mats (different colours for different foodstuffs) for a few quid.
Nice and thing, easy to cut, bendable but stiff enough

Re: Bendable plastic for making a harness

Posted: Tue Nov 05, 2019 3:18 pm
by freddy_tanner
Hmmmm.... potential to double up use for food preparation! Never again will I be struggling to find a place to cut up a sausage while camping. :grin:

Re: Bendable plastic for making a harness

Posted: Wed Nov 06, 2019 6:53 pm
by PaulE
https://www.ikea.com/gb/en/p/finfoerdel ... -30335898/

Bendy plastic chopping boards, 2 for £1 at IKEA...

Re: Bendable plastic for making a harness

Posted: Wed Nov 06, 2019 11:05 pm
by belugabob
PaulE wrote: Wed Nov 06, 2019 6:53 pm https://www.ikea.com/gb/en/p/finfoerdel ... -30335898/

Bendy plastic chopping boards, 2 for £1 at IKEA...
Blimey - even cheaper than B&M

:-bd