I think it also depends on your rims, some will be possible to set up tubeless and some less so. I set up some WTB trail 29 rims that were not "tubeless ready". The main issue was that the rim bed was too deep, so when the tyre was installed but not inflated it wasn't tight enough to hold ...

I have a pair of Microshift 10 speed MTB bar end shifters in my box of bits. You could buy the thumbies attachment for them if they're going on flat bars. https://www.swinnertoncycles.co.uk/microshift-shifter-spares-thumbshifter-spares-p132660/s383845?utm_source=google&utm_medium=cpc&utm_ter...

As someone that works for NRW (but fortunately isn't up for redundancy as many are) the general idea is that anything that isnt a statutory responsibility or doesn't pay for itself is being cut. Sounds like the visitor centres have been making a loss so I'm not surprised that they're going. In my op...

thenorthwind wrote: ↑Tue Jul 16, 2024 8:12 pm

Joe wrote: ↑Tue Jul 16, 2024 9:41 am Have asked a mate of mine, he's re-assembling a reverb and mentioned something about barbs or hydraulic bits or something.
I'll let you know if he could make use of it, thanks.

I think he is all good, thanks though!

Some bits I took off a Reverb years aog before I sent it back for warranty replacement. Any use to anyone? https://i.ibb.co/j4QHZv0/2024-07-15-12-21-45.jpg Have asked a mate of mine, he's re-assembling a reverb and mentioned something about barbs or hydraulic bits or something. I'll let you know if...

I have a black XT 135mm qr hub if you're running rear hubs front and back (so not front disc spacing), seems £10 posted is the going rate?

I may have found a solution! It seems that the Thermarest pump sack valve can connect the Exped schnozzle to the Thermarest Winglock valve on the mat. I happened to have two Thermarest pump sacks because my first Thermarest was faulty and they sent me a new one, so I've chopped out the pump sack val...

Hi All, Gave up on my Exped mat because of the baffles going and making it un-usable and got a Thermarest NeoAir instead. The pump bag supplied with the Thermarest isn't nearly as good as the Schnozzle, it's thicker material, not a roll-top bag and smaller volume so feel like it takes more scoops to...

Has anyone tried both i.e those Juin tech brakes that have a cable actuated hydraulic caliper? My (drop bar) TRP's are getting a bit dicky and new ones cost a fortune so I was thinking of giving the Juin techs a whirl. I have the Juintech GTPs on one of my bikes, they work really well, not quite fu...

I have some FSA omega 1 x cranks with a 40t NW ring attached and a bottom bracket, if that's the sort of chainring size you're after they could work, if not then I think it may not be worth finding a smaller ring. Let me know if they'd be any use to you.

Thanks! They had just what I was after.

Hi all, I'm after a 29er rear tyre in decent condition. Something like a Schwalbe Racing Ralph or similar, let me know if you have anything that may be of use. Thanks!

Have sent you a PM

Made me laugh a lot that one!

Lighting a fire is one thing but leaving it unattended when it's not cold and wet is another.

Think I'll keep hold of the truss in case I swap it back on later

I'm looking for a Jones unicrown fork with the 135mm spacing so I can swap out my truss fork and give myself some space for a dog basket up front. Ideally need about 250mm of steerer.

Thanks in advance!

I have a 56cm Surly Straggler frame and fork. The usual scratches but let me know if it could work for you and I can dig it out the shed for some photos.

Thanks a bunch Boab, I'll send you a pm.

Would like to try some On one OG bars but they're out of stock. Does anyone have a set lying around?

Or if anyone knows anything similar around that price then please let me know. Thanks!

rivers wrote: ↑Tue Jan 31, 2023 5:04 pmCranks are 175

Thanks, I'll pass

Do you know the length of the SLX cranks? I might be interested if they are 165mm.

You can buy a K-lite switch but if you get a soldering iron and some bits of cable and xt-30 or xt-60 connectors you can easily make your own switch that has a cable to the rear light as well, so you don't need to use the K-lite blinker. If I get a xt30 connector, e.g., https://www.amazon.co.uk/FLY...

I like this idea, I'll need to check it out.

Also means you can get it just the right length. Using some adhesive lined heatshrink will keep things neat, strong and waterproof and with some Sugru you can mount the cable to a handlebar or the top of your forks.

I have the k-lite, incredible light and makes me realise how much I strain my eyes with other lights, really feels like a I can relax my eyes while I ride. The only issue with it is that it's not a dipped beam so on roads you will annoy drivers and pedestrians. I used to run it on all the time but e...

I'd be interested in the rotors if someone else wanted the calipers?

Appreciate you would rather sell it all together though!