Hi all

missing not being in the hills, so i'm taking to the internet and trying not to spend money! There was a nice guy who joined us (Richard) on his GT 26er who had a great light bracket to help get the light beam over the front bag, I was wondering if anyone knew what model it is he rides with? I stored it in my memory, but I lost it with the push up the hill to the windfarm!

Thanks

If noone else knows hit the link below. If SJS don't have it, it probably only exists in a parallel universe

https://www.sjscycles.co.uk/accessory-fitting-brackets/

Anything like this?
P1110194 (768x1024) by michaelandamanda, on Flickr

It's basically that, but I use two of these with a separately purchased rod to give it a bit more width (hard to clamp on the handlebars near the stem):

https://www.ebay.co.uk/itm/Cycling-Bike ... 1651143432

Not that model exactly, but similar. I go a little thicker than usual as I've snapped them in the past when hammering the downhills.

I'm going to see if I can get some 3d printed for my 29er as I want the light a bit further from the steer tube.

Edit - Good to be described as nice for once vs the usual descriptors...

Richard G wrote:It's basically that, but I use two of these with a separately purchased rod to give it a bit more width (hard to clamp on the handlebars near the stem):

https://www.ebay.co.uk/itm/Cycling-Bike ... 1651143432

Not that model exactly, but similar. I go a little thicker than usual as I've snapped them in the past when hammering the downhills.

I'm going to see if I can get some 3d printed for my 29er as I want the light a bit further from the steer tube.

Edit - Good to be described as nice for once vs the usual descriptors...

Thanks guys. And thanks for spotting the thread! Just saves me having my light shining mostly at my wheel!