Genesis Longitude

Yorlin · Post by **Yorlin** » Thu Feb 05, 2015 7:45 pm

Very nice! Will be dead interested to hear how it is.

scott of the woods · Post by **scott of the woods** » Fri Feb 06, 2015 9:07 pm

Fantasticmrmatt wrote:Ordered one

29" here I come.......

What size frame have you ordered and how talk are you? I'm thinking of going for the 17.5 frame I'm 5' 8" with shortish legs/longish body

Matt · Post by **Matt** » Fri Feb 06, 2015 9:55 pm

17.5"

Taylor · Post by **Taylor** » Fri Feb 06, 2015 10:09 pm

17.5 will be way too small for you Matt.

Bearbonesnorm · Post by **Bearbonesnorm** » Fri Feb 06, 2015 10:40 pm

17.5 will be way too small for you Matt.

It'll be lovely, remember they've got a reet long TT and I mean reet long

Ian · Post by **Ian** » Fri Feb 06, 2015 10:44 pm

Fantasticmrmatt wrote:Ordered one

29" here I come.......

Would Sir be needing a frame bag to go with that?

I can't guarantee that your existing one will fit

Matt · Post by **Matt** » Fri Feb 06, 2015 11:11 pm

If my current one doesn't fit surely it's warranty

voodoo_simon · Post by **voodoo_simon** » Fri Feb 06, 2015 11:22 pm

scott of the woods wrote:
Fantasticmrmatt wrote:Ordered one

29" here I come.......
What size frame have you ordered and how talk are you? I'm thinking of going for the 17.5 frame I'm 5' 8" with shortish legs/longish body

My initial instinct would say the 16 inch model but the long body may sway that. What's your inside leg?

I tend to downsize myself of mountain bikes (5ft 7 and both salsas are 15 inch) for extra standover

Gilbo71 · Post by **Gilbo71** » Sat Feb 07, 2015 9:35 am

I'm a similar height with short legs and monkey arms but would only consider the 16". I tried a Knard on a Rabbithole rim in the front of my Gryphon and it felt like it raised the front end by a good few inches, so I would imagine that with similar front and rear the standover would be quite high?

Ian · Post by **Ian** » Sat Feb 07, 2015 9:55 am

Fantasticmrmatt wrote:If my current one doesn't fit surely it's warranty

I'll check the small print, but I'm not sure a different frame geometry counts as a defect in work(wo)manship

Mpolo · Post by **Mpolo** » Sat Feb 07, 2015 7:15 pm

went to be fitted for a Longitude today and am on the borderline for 19" on reach but looking at the spec it has a reet short stem at 31.8mm so i should be ok with the 19". does anyone have trouble putting stem cells on a with this short a stem?

PS all sizes are sold out from Madison except the 19"

Ben98 · Post by **Ben98** » Sat Feb 07, 2015 7:29 pm

Mpolo wrote:went to be fitted for a Longitude today and am on the borderline for 19" on reach but looking at the spec it has a reet short stem at 31.8mm so i should be ok with the 19". does anyone have trouble putting stem cells on a with this short a stem?

PS all sizes are sold out from Madison except the 19"

Pretty sure 31.8mm is the clamp size, not stem length?

Farawayvisions · Post by **Farawayvisions** » Sat Feb 07, 2015 8:18 pm

My head hurts from the use of the L word and a thousand suggestions of how it would work so well with his latest acquisition - a Rohlof built into a 29" wheel. Considering the fact that his current bike has 26" wheels, and suddenly has become too small. I can only guess that Beth over in Wildcat World will be getting a new order for a frame bag.

The frame only option comes in a single choice of colours - putty. Dan wants green. What can I say.

These are the numbers Mpolo was working from:

: 20150207_190427.jpg (104.06 KiB) Viewed 4257 times

: 20150207_190300.jpg (109.94 KiB) Viewed 4257 times

Bearbonesnorm · Post by **Bearbonesnorm** » Sat Feb 07, 2015 8:31 pm

Yeah, as Ben says 31.8 indicates the stem / bar diameter not the length. All the pics I've seen would indicate something along the lines of a 80mm - 90mm stem is fitted as standard.

EDITED: For the hard of seeing

Mpolo · Post by **Mpolo** » Sat Feb 07, 2015 8:48 pm

I think you could be right so how long is the stem?

sorry slow of computer here

Bearbonesnorm · Post by **Bearbonesnorm** » Sat Feb 07, 2015 10:06 pm

I think you could be right so how long is the stem?

Read what I put in the post above yours

scott of the woods · Post by **scott of the woods** » Sat Feb 07, 2015 10:56 pm

voodoo_simon wrote:
scott of the woods wrote:
Fantasticmrmatt wrote:Ordered one

29" here I come.......
What size frame have you ordered and how talk are you? I'm thinking of going for the 17.5 frame I'm 5' 8" with shortish legs/longish body
My initial instinct would say the 16 inch model but the long body may sway that. What's your inside leg?

I tend to downsize myself of mountain bikes (5ft 7 and both salsas are 15 inch) for extra standover

I've got a 29" inside leg, and now looking at the data sheet above the tt length of the 16" looks closer to my old 17.5" frame, i think i'll have a word with my lbs and try out the 16" and the 17.5"

DrMekon · Post by **DrMekon** » Mon Feb 09, 2015 2:07 pm

Went and got sized up for one at the weekend. I'm 6'3. Guy reckoned fit wasn't weird, and that I'm normal shaped. Was a def 20.5 for me.

Doing it on C2W.

Mpolo · Post by **Mpolo** » Fri Feb 20, 2015 6:32 pm

i just went to order one and Genesis are sold out of all sizes!

Bearbonesnorm · Post by **Bearbonesnorm** » Fri Feb 20, 2015 7:00 pm

i just went to order one and Genesis are sold out of all sizes!

What size do you need? 19" here for £899: http://www.unitycycleworks.co.uk/collec ... -29er-2015 and a free Genesis T shirt .... oooohh.

Dave Barter · Post by **Dave Barter** » Wed Jun 03, 2015 8:24 pm

Thread resurrection.

Anyone know of any 17.5" framesets in stock anywhere? I need a project during the current pedestrian phase

Bearbonesnorm · Post by **Bearbonesnorm** » Wed Jun 03, 2015 8:46 pm

Anyone know of any 17.5" framesets in stock anywhere? I need a project during the current pedestrian phase

How tall are you? They're a very long frame.

Dave Barter · Post by **Dave Barter** » Wed Jun 03, 2015 10:16 pm

Bearbonesnorm · Post by **Bearbonesnorm** » Thu Jun 04, 2015 8:54 am

5'8"

I'd consider the 16" ... I had a go on a 17.5" and it felt very long.

Have you had a word with Shona and Rich at Keep Pedalling?

wfbroddy · Post by **wfbroddy** » Thu Jun 04, 2015 9:01 am

I'm 5'8" and use the 16" frame, photo below in test bicycle for a overnighter running 29+ Maxxis Chronicles,
using the Genesis swoop back bars so the stem is a 90mm if I remember,
the seat post has maybe about 1-1.5" left in the tube before it hits the max out line

I find it a really good fit and I would say I'm average build

Ardgarten_fail by Rod K, on Flickr

Genesis Longitude

Re: Genesis Longitude

Re: Genesis Longitude

Re: Genesis Longitude

Re: Genesis Longitude

Re: Genesis Longitude

Re: Genesis Longitude

Re: Genesis Longitude

Re: Genesis Longitude

Re: Genesis Longitude

Re: Genesis Longitude

Re: Genesis Longitude

Re: Genesis Longitude

Re: Genesis Longitude

Re: Genesis Longitude

Re: Genesis Longitude

Re: Genesis Longitude

Re: Genesis Longitude

Re: Genesis Longitude

Re: Genesis Longitude

Re: Genesis Longitude

Re: Genesis Longitude

Re: Genesis Longitude

Re: Genesis Longitude

Re: Genesis Longitude

Re: Genesis Longitude