Disk spacing
Moderators: Bearbonesnorm, Taylor, Chew
- BigdummySteve
- Posts: 2974
- Joined: Sun Nov 20, 2016 9:16 pm
- Location: Somewhere over the rainbow
Disk spacing
On my ecr I run a 203mm disk, not for the extra stopping power over a 180 but with the smaller disk The calliper contacts the spokes when cornering. My new fork is only rated for a 180, should I fit the big one and never grab a handful or can I use something to space the disk away from the spokes?
We’re all individuals, except me.
I woke up this morning but I’m still in the dark
I woke up this morning but I’m still in the dark
Re: Disk spacing
Could you put some spacers (washers) on the disc bolt to move the disc out?
2924 miles per Gallon
- Bearbonesnorm
- Posts: 23972
- Joined: Sun Jun 05, 2011 8:53 pm
- Location: my own little world
Re: Disk spacing
Washers will work as Mart says or you can actually buy disc spacers.
https://www.evanscycles.com/hope-6-bolt ... AjhG8P8HAQ
https://www.evanscycles.com/hope-6-bolt ... AjhG8P8HAQ
May the bridges you burn light your way
- BigdummySteve
- Posts: 2974
- Joined: Sun Nov 20, 2016 9:16 pm
- Location: Somewhere over the rainbow
Re: Disk spacing
Cheers hopefully it will get my 180 working. 203mm disks are a bit overkill anyway.Bearbonesnorm wrote:Washers will work as Mart says or you can actually buy disc spacers.
https://www.evanscycles.com/hope-6-bolt ... AjhG8P8HAQ
We’re all individuals, except me.
I woke up this morning but I’m still in the dark
I woke up this morning but I’m still in the dark