FS, stems, seatpost and shifters.

[Gari]

The shifters are 10x2spd 105. The cables are still attached in the image though will be removed before shipping obviously. Taken off the bike that is now 11 spd, in good condition having only done about 500km I am guessing. £50 posted. I also have an XT 9spd rear mech to go with, if you fancy a complete set up(would also save me stripping the cables!!) for another £15.
45mm Elite x3 in black Fitted and found to be too short for what I wanted. £40 posted
80mm 0 rise, again fitted, ridden once and removed. £40 posted. Both for oversized bars.
Seatpost is 27.2, 300mm. pretty scratched but works fine, £25 posted.

[pushbikemike]

Hello Gari
I'll take the brake levers and rear mech please.
How would you like paying?

Mike

[polarcherry]

What's a Thomson X3?

45mm sounds good length but is it for 31.8 bars and 1 1/8th steerer?

[Gari]

@mike, my PP is garibeetatbtinternet.com
Let me know your address and I shall get it posted tomorrow.
@polarcherry, it's the black stem. Yes and yes for the sizing.

[ianfitz]

Could I take the 80mm stem

[Gari]

Sure, do I have your address already? Sure I have sent you something already, though I am getting on a bit so not sure

[polarcherry]

Sorry to be a pain Gari

But just googled Thomson X3 and can't find anything? And the only 45mm stem I can find is an 1.5inch oversize steerer stem.

Can you just confirm again? Do you have a close up photo of just the stem itself.

[Gari]

My bad, it's an X4! sorry.

[polarcherry]

It's a 40mm too rather than a 45mm
Might be a bit short.

Would you take £35 posted?

[Gari]

Sure, I shall pm you for the address etc.

[Gari]

All but the seatpost sold.

[Mike]

Gari have you sold those 10spd shifters yet??