Hi all
missing not being in the hills, so i'm taking to the internet and trying not to spend money! There was a nice guy who joined us (Richard) on his GT 26er who had a great light bracket to help get the light beam over the front bag, I was wondering if anyone knew what model it is he rides with? I stored it in my memory, but I lost it with the push up the hill to the windfarm!
Thanks
Light Bracket
Moderators: Bearbonesnorm, Taylor, Chew
- Escape Goat
- Posts: 2603
- Joined: Thu Nov 01, 2018 10:41 pm
- Location: Not nearly close enough to Scotland...
Light Bracket
My Movie Channel: https://tinyurl.com/YoutubeEG
My Instagram: https://www.instagram.com/allen.boardman
My Instagram: https://www.instagram.com/allen.boardman
- TheBrownDog
- Posts: 2107
- Joined: Thu Mar 14, 2013 8:46 pm
- Location: Chilterns
Re: Light Bracket
If noone else knows hit the link below. If SJS don't have it, it probably only exists in a parallel universe
https://www.sjscycles.co.uk/accessory-fitting-brackets/
https://www.sjscycles.co.uk/accessory-fitting-brackets/
I'm just going outside ...
Re: Light Bracket
Zazen - nothing happens next this is it.
Re: Light Bracket
It's basically that, but I use two of these with a separately purchased rod to give it a bit more width (hard to clamp on the handlebars near the stem):
https://www.ebay.co.uk/itm/Cycling-Bike ... 1651143432
Not that model exactly, but similar. I go a little thicker than usual as I've snapped them in the past when hammering the downhills.
I'm going to see if I can get some 3d printed for my 29er as I want the light a bit further from the steer tube.
Edit - Good to be described as nice for once vs the usual descriptors...
https://www.ebay.co.uk/itm/Cycling-Bike ... 1651143432
Not that model exactly, but similar. I go a little thicker than usual as I've snapped them in the past when hammering the downhills.
I'm going to see if I can get some 3d printed for my 29er as I want the light a bit further from the steer tube.
Edit - Good to be described as nice for once vs the usual descriptors...
- Escape Goat
- Posts: 2603
- Joined: Thu Nov 01, 2018 10:41 pm
- Location: Not nearly close enough to Scotland...
Re: Light Bracket
Thanks guys. And thanks for spotting the thread! Just saves me having my light shining mostly at my wheel!Richard G wrote:It's basically that, but I use two of these with a separately purchased rod to give it a bit more width (hard to clamp on the handlebars near the stem):
https://www.ebay.co.uk/itm/Cycling-Bike ... 1651143432
Not that model exactly, but similar. I go a little thicker than usual as I've snapped them in the past when hammering the downhills.
I'm going to see if I can get some 3d printed for my 29er as I want the light a bit further from the steer tube.
Edit - Good to be described as nice for once vs the usual descriptors...
My Movie Channel: https://tinyurl.com/YoutubeEG
My Instagram: https://www.instagram.com/allen.boardman
My Instagram: https://www.instagram.com/allen.boardman