Light Bracket

Talk about anything.

Moderators: Bearbonesnorm, Taylor, Chew

Post Reply
User avatar
Escape Goat
Posts: 2600
Joined: Thu Nov 01, 2018 10:41 pm
Location: Not nearly close enough to Scotland...

Light Bracket

Post by Escape Goat »

Hi all

missing not being in the hills, so i'm taking to the internet and trying not to spend money! There was a nice guy who joined us (Richard) on his GT 26er who had a great light bracket to help get the light beam over the front bag, I was wondering if anyone knew what model it is he rides with? I stored it in my memory, but I lost it with the push up the hill to the windfarm!

Thanks
:-bd
User avatar
TheBrownDog
Posts: 2107
Joined: Thu Mar 14, 2013 8:46 pm
Location: Chilterns

Re: Light Bracket

Post by TheBrownDog »

If noone else knows hit the link below. If SJS don't have it, it probably only exists in a parallel universe

https://www.sjscycles.co.uk/accessory-fitting-brackets/
I'm just going outside ...
User avatar
Mariner
Posts: 1793
Joined: Fri Feb 06, 2015 2:37 pm
Location: East Devon

Re: Light Bracket

Post by Mariner »

Anything like this?
ImageP1110194 (768x1024) by michaelandamanda, on Flickr
Zazen - nothing happens next this is it.
User avatar
Richard G
Posts: 4887
Joined: Sat Apr 04, 2015 9:09 am
Location: South Wales

Re: Light Bracket

Post by Richard G »

It's basically that, but I use two of these with a separately purchased rod to give it a bit more width (hard to clamp on the handlebars near the stem):

https://www.ebay.co.uk/itm/Cycling-Bike ... 1651143432

Not that model exactly, but similar. I go a little thicker than usual as I've snapped them in the past when hammering the downhills.

I'm going to see if I can get some 3d printed for my 29er as I want the light a bit further from the steer tube.

Edit - Good to be described as nice for once vs the usual descriptors... :lol:
User avatar
Escape Goat
Posts: 2600
Joined: Thu Nov 01, 2018 10:41 pm
Location: Not nearly close enough to Scotland...

Re: Light Bracket

Post by Escape Goat »

Richard G wrote:It's basically that, but I use two of these with a separately purchased rod to give it a bit more width (hard to clamp on the handlebars near the stem):

https://www.ebay.co.uk/itm/Cycling-Bike ... 1651143432

Not that model exactly, but similar. I go a little thicker than usual as I've snapped them in the past when hammering the downhills.

I'm going to see if I can get some 3d printed for my 29er as I want the light a bit further from the steer tube.

Edit - Good to be described as nice for once vs the usual descriptors... :lol:
Thanks guys. And thanks for spotting the thread! Just saves me having my light shining mostly at my wheel!

:-bd
Post Reply